Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
You just need 16 pt sockets for the seat bolts. Good work.Well today has been productive and busy I got my center console installed, stereo moved down and ready to get the car computer installed fought with seat bolts more I found that it wasn't even an e16 for the front they are e20's however a 15mm worked to get the bolts out
Bench seat is pulled
View attachment 215512
After a good vacuum I got the console in and bolted down.. I did have to snag the harness from my glove box assembly to get the front two 12 volt ports working
View attachment 215514 View attachment 215513
Hopefully tomarrow I will get some time to get the car PC put in but I am all prepped to get it installed
Oh and I ended up flipping the cubby because I didnt have the rubber piece for the bottom
Oh yeah 12 point lol. I can’t find my 16 points either.I didn't have my 12 points with me suprising my 6 point was able to get it done.
Haha thanks next I think something's gotta go in that hole in the dash
it has its test fit in and is up and running =) I only fought the simplistic most task in installing I set up all my relays for positive trigger forgot to test at the bcm it is a negitive trigger for the headlights it's ok I set my night mode to run of the time for now.
Thanks man, been collecting parts and bench testing for about a year now before getting it in
Haha yeah, it's actually just a double din kit with the official RasberryPi Touchscreen Glued into it. LOLIf only someone sold retrofit kits like this.
Would be popular, especially for 99-06 trucks.
