Let's see some pics of some lifted and leveled

[01Konvict]

Now that I actually took measurements, I'm kind of worried I might need to do UCAs or drop the 5100's back to the "stock height". Everything aligned to what looks like spec but my stock measurements were something like 36 1/2" front and 38" rear. I do feel like I'm cutting it close on the front suspension travel. I'm going to take some pics of the front angles to post and get your opinion.


FR- 39"
FL- 39 1/4"
RR-40"
RL-40 1/2"

Nice fender heights. Check the front drop stops and how close they are to arms. Could add lift arms to help gain clearance. Still post your tricks to fool computer so others can follow.

 

[ta07hoe]

Now that I actually took measurements, I'm kind of worried I might need to do UCAs or drop the 5100's back to the "stock height". Everything aligned to what looks like spec but my stock measurements were something like 36 1/2" front and 38" rear. I do feel like I'm cutting it close on the front suspension travel. I'm going to take some pics of the front angles to post and get your opinion.


FR- 39"
FL- 39 1/4"
RR-40"
RL-40 1/2"

Mine was stock when I got it with 275/60r20 (not the stock 275/55) was 36 front 38 rear. Now I'm a hair over 37 3/4 in the front and an even 38 in the back. I want more but I'm afraid to go any higher due to angle. I will probably get a 1" spacer for the rear tho. Yours sits tall, those shocks gave you a nice boost.

 

[MichaelSE]

Needs some bigger tires, stat!

 

[YukonandtheHOE]

3" front, stock rear
33x12.5r17 redletter grabbers on MT Classic Black 3 4.5"bs

 

[JaysTahoe90]

View attachment 65734

What lift and tire setup?

 

[battlewagon]

http://www.roughcountry.com/gm-suspension-lift-kit-287c.html

Does someone have the installation instructions for this kit, the Rough Country 7.5" lift for 2007-2014 Chevy Suburban 4WD? Ive googled and they do not have on their website.

I am specifically trying to confirm that you do NOT need longer brake lines with installation, that the kit uses a bracket kit.

 

[battlewagon]

http://s3.amazonaws.com/roughcountry/install/92128600R1.pdf

Nevermind, and confirmed, do not need longer lines.

 

[01Konvict]

http://s3.amazonaws.com/roughcountry/install/92128600R1.pdf

Nevermind, and confirmed, do not need longer lines.

Yeah don't need them. The brackets and bending of hard lines is all that's needed. When you going to post pictures of that burb?

 

[battlewagon]

Ironing out something with the truck, can't in good conscious post pics until truck is 100%, soon though!

 

[01Konvict]

Ironing out something with the truck, can't in good conscious post pics until truck is 100%, soon though!

Hurry up with it already. Mine is getting a custom rear driveshaft made because of the lift height and short wheelbase causing vibrations. Not sure if its all hoe/kon platform or just cause mines the AWD transfer case but either way multiple lift parts and custom rear shaft it will be resolved.