I have a 2.5 TGC up front and that's it. I'm on 305/55/20 falkens and I rub in the back in extreme off camber situations and on the sway bar up front at full lock when in reverse. I trimmed a little in front and back (pics are in this thread). Offset and tire width will make all the difference.
My falkens are 33.2x12.3 according to their website. If you stay around/below 12" wide and no taller than 33.5 you should be fine with a 2.5/1 especially if you add in 5100s for a little extra in front. BTW, the TGC left my ball joint & CV angles just fine, I don't worry about them at all.
My falkens are 33.2x12.3 according to their website. If you stay around/below 12" wide and no taller than 33.5 you should be fine with a 2.5/1 especially if you add in 5100s for a little extra in front. BTW, the TGC left my ball joint & CV angles just fine, I don't worry about them at all.
New guy to the forum. Sorry for the all the questions. I'm an owner of a 2009 Tahoe and I plan to get the CCM leveling kit soon. Was wondering if 22"s with 33"s fit and if I should get anything else done while getting the lift done? Such as shocks, springs, etc. Thanks