avalonandl
Full Access Member
Synthetic all the way, not mineral. Were in 2023, not 1953.
Lifters noise
- Thread starter Faustof
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Faustof
TYF Newbie
- Joined
- Jun 12, 2023
- Posts
- 28
- Reaction score
- 11
will change the oil to de syntetic ASAP. The odd thing is that when you start the truck thre is no noise for several minutes , after while there is the ticking noise...
If you wish, you can post a video of the noise and we can weigh in on likely causes.
Tuscan Ranch
TYF Newbie
- Joined
- Sep 2, 2022
- Posts
- 8
- Reaction score
- 9
deleted - my comment was not relevant
OP
OP
Faustof
TYF Newbie
- Joined
- Jun 12, 2023
- Posts
- 28
- Reaction score
- 11
Thanks for the interest. I am very grateful. Here are the videos, the shortest and most static, it is the one that was taken cold. The second is after a while, already hotter. Greetings
OP
OP
Faustof
TYF Newbie
- Joined
- Jun 12, 2023
- Posts
- 28
- Reaction score
- 11
I will gladly , but I am having trouble downloading it. Is there a whatsapp number or email where I can send you the two videos (they are less tah 20 seconds each, don´t know why it says is too large). Thanks very much
donjetman
Full Access Member
- Joined
- Oct 22, 2018
- Posts
- 1,537
- Reaction score
- 2,726
You have to download them on YT and post the link here.
OP
OP
Faustof
TYF Newbie
- Joined
- Jun 12, 2023
- Posts
- 28
- Reaction score
- 11
here are the 2 videos , the one where is no thicking sound is in cold engine in the morning.
the otherone is after 15 -20 minutes
Thanks
Dustin Jackson
Full Access Member
- Joined
- Aug 9, 2018
- Posts
- 1,544
- Reaction score
- 1,741
@Faustof I hear some pretty good rattle at initial startup that seems to smooth out to a mild rattle at hot idle.
This could be a result of using lower quality parts, possible the lifters are not holding fluid at idle and there is slack between the push rod and lifter causing a lifter rattle.
If this continues after using the correct oil I would not run the motor like this, sound seems to be coming from passenger side.
This could be a result of using lower quality parts, possible the lifters are not holding fluid at idle and there is slack between the push rod and lifter causing a lifter rattle.
If this continues after using the correct oil I would not run the motor like this, sound seems to be coming from passenger side.
Agree with @Dustin Jackson, change the oil with good quality oil but if that doesn't help, it's time for a valve adjustment (at least that's what id do first once the valve cover's off..
If a valve adjustment doesn't fix it and a lifter has failed, pop both heads off and replace all lifters, trays (oem only for these parts) and check the heads for warpage. If warped, have them surfaced and gone through. Then reinstall everything - make sure you buy new head bolts (i prefer ARP) then install new knock sensors and intake gaskets, etc.
How many miles on the engine?
If a valve adjustment doesn't fix it and a lifter has failed, pop both heads off and replace all lifters, trays (oem only for these parts) and check the heads for warpage. If warped, have them surfaced and gone through. Then reinstall everything - make sure you buy new head bolts (i prefer ARP) then install new knock sensors and intake gaskets, etc.
How many miles on the engine?
