Tonyrodz
Resident Resident
Oh yeah ?Inside job
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Oh yeah ?Inside job
Is your original cam a 1 bolt or 3 bolt? I had to use a new one and would suggest you do the same depending on miles. They do wear over time and easier to do now than later. I'm running a double roller but it's not necessary@67RS427 , hey Matt as you know I started my project today, did get very far, but we noticed that I am missing a cam gear so my question is if the stock one will fit on BTR cam? or don't mess with it and just order a new 3 bolt cam gear?
Is your original cam a 1 bolt or 3 bolt? I had to use a new one and would suggest you do the same depending on miles. They do wear over time and easier to do now than later. I'm running a double roller but it's not necessary
Common parts, get from Summit or Jegs. You can make your own kit too, part numbers are nothing specialDidn't look at the paperwork but whole vvt delete kit is on back order. Another set back, not a good start.
Common parts, get from Summit or Jegs. You can make your own kit too, part numbers are nothing special