Misfiring issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
Keep getting this code, when I had a tech come and check it out before I put in a new fuel pump I had no problems but he said that normally when the regulator goes bad you'll get that p0306 or p0304 or p0308 or all of them at the same time depending on how bad it is, any truth to this? Anyone had experience with this?


Sent from my iPhone using Tapatalk
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
So I pulled the plug and this is what I found, seems strange how it's black on one side of the insulator, is this a bad plug maybe?
90b3b68a9d1c11eb3f41235d1f0ddd16.jpg
931d8d2cb62a9f01b654f95a5180ce95.jpg



Sent from my iPhone using Tapatalk
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
These are brand new plugs with less than 1000 miles on them


Sent from my iPhone using Tapatalk
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
c68f1c007afeda5e0de357a44c822062.jpg


11bb81c4169b61102a170793f9f3c71c.jpg


Decided to pull the cap and rotor and this is what I found seems like something isn't quite right, some of the marks on the cap are higher than the rest and are pitted. the rotor has some arcing on the side of the tip that actually has some of the rotor material actually sticking out from the end could this be causing my misfiring or is it something else?? Help please?


Sent from my iPhone using Tapatalk
 

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,715
When the plugs were done was the cap and rotor ever replaced? If not it should have been. Your spark starts at the cap and rotor if your doing plugs its always a good idea to do the cap and rotor at the same time.
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
When the plugs were done was the cap and rotor ever replaced? If not it should have been. Your spark starts at the cap and rotor if your doing plugs its always a good idea to do the cap and rotor at the same time.

Everything was replaced at the same time including the coil
 

drakon543

Full Access Member
Joined
Feb 15, 2016
Posts
2,473
Reaction score
1,715
What brand of cap and rotor and plugs did you buy? The oem style distributors dont seem to like certain caps and rotors.
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
Oe everything, I did a smoke test on it to check for vacuum leaks just in case because my idle surges, I already put on a new iac but it doesn't help and the only time it will throw a misfire code is if im stuck in traffic


Sent from my iPhone using Tapatalk
 

1998Suburban

Full Access Member
Joined
Feb 6, 2014
Posts
109
Reaction score
23
Optispark II is very picky when it comes to caps & rotors. That could definitely cause your intermittent misfire. How many miles on the cap? 20K?
 
OP
OP
DallasTahoe

DallasTahoe

Full Access Member
Joined
Aug 17, 2012
Posts
711
Reaction score
214
Optispark II is very picky when it comes to caps & rotors. That could definitely cause your intermittent misfire. How many miles on the cap? 20K?

Optispark II? I don't have that, that's for lt1 engines I believe
 

Forum statistics

Threads
132,327
Posts
1,866,068
Members
96,932
Latest member
soundude
Top