Moaning when turning in 4WD

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Nickleahy23

Full Access Member
Joined
May 5, 2009
Posts
924
Reaction score
5
Location
Portage/Menomonie, WI
well today i was out on the lake, and was doin 4x4 dounuts and 4x4 drifts around a 200 yard circle for an hour, and it works just fine..so i wouldnt worry about the whining too much..if that means anything lol
 

91RS

Full Access Member
Joined
Nov 15, 2009
Posts
2,588
Reaction score
2,033
Location
GA
NEVER USE 4WD ON DRY PAVEMENT!!! You will damage the system on DRY pavement! You will also get binding when turning which is NORMAL and means the system is working properly. You will get more binding on a Tahoe because it is short wheel base, even a 2WD will bind slightly when turned sharply because of that and the tight turning radius.

If you want 4WD all the time, you need to buy a Denali with AWD or an H2 with full-time 4WD where the systems are designed to run all the time.
 

taylorjm

Full Access Member
Joined
May 12, 2011
Posts
395
Reaction score
1
Location
Saginaw, MI
Just to revive an old thread. I just replaced my ball joints and bearings and my moaning and groaning 4wd noise is gone! Must have been a bearing.
 

STACK

TYF Newbie
Joined
Oct 8, 2012
Posts
6
Reaction score
0
Location
Rochester Hills, MI
I've been experiencing these symptoms once in awhile. The groaning happens when turning into a parking space or driveway at low speeds. I don't see it affecting the actual functionality of the vehicle, just a bit embarrassing when you have female passengers in the vehicle and your Denali is making Jalopyious noises. LOL.

Wheel bearing and ball joints are something I will need to have fixed soon though. I'll keep you guys posted to double verify that those replacement parts for sure take care of the noise.
 

PNWYukon

Full Access Member
Joined
May 13, 2015
Posts
300
Reaction score
239
Location
Olympia, WA
Did anyone else solve the noise issue? Turning to the left in 4WD and getting the grinding/grumbling noises to stop?
 

Forum statistics

Threads
132,236
Posts
1,864,468
Members
96,785
Latest member
Jack23fcb
Top