Mounting Ideas

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Autbond

Full Access Member
Joined
Apr 25, 2011
Posts
376
Reaction score
2
I have a PA/Siren coming in later this week along with some Blue/White LED flashers for behind the factory grille.

I am asking for ideas on where to mount the control unit for everything, looks like this:

Thanks ahead of time for any ideas. I want it to be easily accessible but somewhat hidden at the same time.
 

Attachments

  • PA-siren.jpg
    PA-siren.jpg
    43.8 KB · Views: 33

RollTide2

Full Access Member
Joined
Oct 17, 2011
Posts
490
Reaction score
1
Location
Birmingham
My friend with a avalanche put his in his center console. He took it out otherwise I'd take a pic for you.
 
OP
OP
Autbond

Autbond

Full Access Member
Joined
Apr 25, 2011
Posts
376
Reaction score
2
I thought about that, but it isn't as accessible as I would like it. I am thinking somewhere close to where my right knee sits while in the driver's seat, but I really don't know.

30 people have looked and no ideas?
 

Diabology

What's not good?
Joined
Oct 22, 2011
Posts
313
Reaction score
11
Location
Asheville, NC
You could put it where your cupholder is, but lose access to those. You could put it where a trailer brake controller would normally go, under the steering wheel. Or, I used to have a cb on the dash, you could do that.

So, are you in law enforcement by any chance? Sounds like you're turning the hoe into a police hoe.:hands:
 

RollTide2

Full Access Member
Joined
Oct 17, 2011
Posts
490
Reaction score
1
Location
Birmingham
I thought about that, but it isn't as accessible as I would like it. I am thinking somewhere close to where my right knee sits while in the driver's seat, but I really don't know.

30 people have looked and no ideas?

That's where my bass knob is but it's not as big as that.
 

Regency

Supporting Member
Joined
Dec 14, 2011
Posts
5,093
Reaction score
664
Maybe mounted by your knee on the side of the center console?
 
OP
OP
Autbond

Autbond

Full Access Member
Joined
Apr 25, 2011
Posts
376
Reaction score
2
You could put it where your cupholder is, but lose access to those. You could put it where a trailer brake controller would normally go, under the steering wheel. Or, I used to have a cb on the dash, you could do that.

So, are you in law enforcement by any chance? Sounds like you're turning the hoe into a police hoe.:hands:
I like the under the steering wheel idea, I can't lose the cupholders! haha.

haha..No, I am not law enforcement but it is fun to mess with bad drivers sometimes and with friends. It is really just for show. I have gotten in trouble with them before so I know the limits now.

---------- Post added at 02:56 PM ---------- Previous post was at 02:55 PM ----------

Maybe mounted by your knee on the side of the center console?
This is where I was thinking the whole time, there seems to be the most room there.

Fabricating a bracket sounds like the best plan, it may be possible to just use some double-sided tape.

Thanks everyone for the responses. Seems like a few of us had the same idea.
 

Forum statistics

Threads
132,082
Posts
1,862,016
Members
96,540
Latest member
thewheel82
Top