NORCAL SS Custom 2/3.5-4.5 for all 2wd 2015+ GM SUV

[fratzke7]

I just installed my kit and now the suspension leveling system light came on the dash?

 

[gat0r]

I just installed my kit and now the suspension leveling system light came on the dash?

prolly better to either PM, IG or text him...

https://www.tahoeyukonforum.com/threads/any-drop-questions-im-here.117204/

 

[fratzke7]

Yup I text him and got me all squared away..my installer forgot to connect the autoride adjusters


Sent from my iPhone using Tapatalk

 

[Fsuhammond]

Was just about to place an order and watched a couple videos where new rear sway bar end links are needed. I don’t see these mentioned in the kit details. Any clarification is appreciated. Thank you.

 

[lynxnova]

I have the 15 non mag or air, did the belltech 2 front 3.5/4.5 rear and the rear was slammed without the spacer... i think it looks great... so i ordered belltech struts for front to go another 1.5... so ill have a 3.5 front and 4.5 rear but i thought rear that non mag or air was even lower like basically 5 inches without the spacer...can anyone comfirm?

Also will I need new uppers? So the front ball joint isnt so raked?

Running 24s 295 35 24 here is a pic from yesterday

View attachment 218994

Nice truck mentalmadness, seems like I have the same drop where the front only went down 1.25” after installing the 2” spindle. Did you order the strut cup to go another 1.5” lower in front? Is so can you post and pic and did you have any alignment problems? Thanks in advance


Sent from my iPhone using Tapatalk

 

[KennyK]

Nice truck mentalmadness, seems like I have the same drop where the front only went down 1.25” after installing the 2” spindle. Did you order the strut cup to go another 1.5” lower in front? Is so can you post and pic and did you have any alignment problems? Thanks in advance


Sent from my iPhone using Tapatalk

i had the same issue with only getting 1.25 out of the spindle. i ended up getting the struts to lower the front some more

 

[lynxnova]

i had the same issue with only getting 1.25 out of the spindle. i ended up getting the struts to lower the front some more

When you say strut, do you mean the strut cup setup or just new struts?


Sent from my iPhone using Tapatalk

 

[KennyK]

When you say strut, do you mean the strut cup setup or just new struts?


Sent from my iPhone using Tapatalk

belltech strut part number 25004

 

[GranPrix]

@NORCAL SS Tony do you know if you HAVE TO change the knuckles when lowering? I have an LS hoe and I'm swapping the springs and struts for PPV springs and struts. But I noticed the PPV and civilian models have different knuckle part numbers... does anyone know why?

 

[mbp1979]

@NORCAL SS Tony do you know if you HAVE TO change the knuckles when lowering? I have an LS hoe and I'm swapping the springs and struts for PPV springs and struts. But I noticed the PPV and civilian models have different knuckle part numbers... does anyone know why?

Ones probably an aluminum one and ones probably a cast one. That's would more than likely be the difference.