Pete's (Now Nate's) 2003 Denali Budget Build thread

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
Theres no way i would've been able to take those pads off with my bumper on. Those clips were almost impossible to take off. But I think it was die to its life up here and the weather.
I choose pic #3.
Are you gonna add color to the wheels?
 
OP
OP
Sevenevez

Sevenevez

Supporting Member
Joined
Dec 13, 2012
Posts
1,202
Reaction score
3,321
Location
Arizona
Theres no way i would've been able to take those pads off with my bumper on. Those clips were almost impossible to take off. But I think it was die to its life up here and the weather.
I choose pic #3.
Are you gonna add color to the wheels?

a couple were tough to get too with pliers but, they werent too bad. only one broke.yeah, still plan on painting the faces of the wheels but not right away.

I like them all
Too but like like the one without orange the most haha.

2 votes for the simple one :)

Page 100! You have to have it painted and put back together before page 101:buffer:
That's the rules

haha, that is not possible.unless i delete about 3 pages worth of posts
 

Cattivo

Full Access Member
Joined
Dec 21, 2016
Posts
1,251
Reaction score
2,207
Location
The Concrete Jungle
Nice job you old **** lol...are you wet sanding the entire truck by hand or are you using some type of orbital sander? I know what a pain in the ass it is wet sanding by hand, you definitely get better results because you can feel every rough/high spot and keep sanding until its as smooth as a babies ass

I know this aint your first rodeo painting a car or truck but after you finish spraying on the clear, I found using an orbital polisher and menzerna to get rid of the extra orange peel then doing 3 step paint correction made the paint job shine like it just rolled off the showroom

Flex XC3401VRG Positive-Drive Rotary-Orbital Polisher - Power Polishing Tools - Amazon.com

Amazon.com: Menzerna Maximum Shine Kit: Automotive
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
Then would I pick the last pic if you incorporate the orange onto the wheels. Small detail like lug nuts or a pin stripe on lip.
 
OP
OP
Sevenevez

Sevenevez

Supporting Member
Joined
Dec 13, 2012
Posts
1,202
Reaction score
3,321
Location
Arizona
Nice job you old **** lol...are you wet sanding the entire truck by hand or are you using some type of orbital sander? I know what a pain in the ass it is wet sanding by hand, you definitely get better results because you can feel every rough/high spot and keep sanding until its as smooth as a babies ass

I know this aint your first rodeo painting a car or truck but after you finish spraying on the clear, I found using an orbital polisher and menzerna to get rid of the extra orange peel then doing 3 step paint correction made the paint job shine like it just rolled off the showroom

Flex XC3401VRG Positive-Drive Rotary-Orbital Polisher - Power Polishing Tools - Amazon.com

Amazon.com: Menzerna Maximum Shine Kit: Automotive

yeah, doing it by hand. when it is completely sprayed and cured after about a week or more i will asses the reflection and if it needs it, i will probably wet sand it by hand using the rectangle rubber blocks wrapped in wet paper. then i will use the Griot's Garage random orbital and do the 3-step. I use that thing all the time and it works great.

used it on my Lexus when i did the whole car was badly scratched/swirled

before

g70.jpg

after

g71.jpg

Then would I pick the last pic if you incorporate the orange onto the wheels. Small detail like lug nuts or a pin stripe on lip.

i doubt i will work any orange into the wheels. but who knows. havent quite decided on that yet. thanks

Looks good pete. Couple moar beers and you can have any zigzag line or color combo you want....lol

haha, moar beers and i guarantee the lines wont be straight. might be more zig zags by accident
 

Forum statistics

Threads
132,360
Posts
1,866,614
Members
96,981
Latest member
12GMCYukon
Top