Post your setups!!

[skrewd21]

'92 Balzer, 6" ProComp Suspension Lift with MX-6 Shocks, ProComp Steering Stabilzer, 2" Performance Engineering Body Lift, 20" Stealth BMF SOTA's wrapped in 35" Nitto Trail Grapplers.

What the ****'s the Internet!!!!!

 

[bowtiefreak]

nice truck. Throw some paint on that frame though

 

[skrewd21]

I'm painting the frame and wheel wells this weekend after I get them cleaned up


What the ****'s the Internet!!!!!

 

[Ceejkay]

that color is interesting, i like it tho

 

[bowtiefreak]

clean them with dish soap, it helps strip the grease and oil out.

 

[noJeepshere]

Nothing too drastic:

1.5 block out back
1.5 crank in front
265/70-17 toyo all-terrains
17x8 Police Tahoe wheels







I'm going to swap the blocks for ORD 1" zero rates and a wedge to get the driveshaft angle right, along with some spicer u-joints, mine creak when I hit the throttle from a standstill. For me, to lift it further, I'd want to get rid of the slip yoke, and since my autotrac has an integrated slipyoke on the t-case, I'd need to swap t-cases, and that just adds up from there.

 

[fyredude57]

97 cranked T bars to level 285/75/r16s no rub but close

 

[rabbiporkchop]

95 tahoe, hp d44 front, d60 rear, Alcan leafs all around, H2 tires and rims all around

 

[m0nst3r97]

97 4 door. about 10 total. 3 body 7 susp. sas, d60, sitting on 38x15.5 on 20x14 fuel hostages. whipple charged. couple things here and there, as like many, a long project in the makings

 

[sparg93]

97 4 door. about 10 total. 3 body 7 susp. sas, d60, sitting on 38x15.5 on 20x14 fuel hostages. whipple charged. couple things here and there, as like many, a long project in the makings

Wow - pretty amazing list of mods!

Did you wrench on this thing??