robdeniro0
Full Access Member
- Joined
- Jan 17, 2011
- Posts
- 131
- Reaction score
- 0
And I can't wait to get them back from you! Says said customer.
Replica Escalade 3rd brake light and housing
- Thread starter DwDrummer
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Phil DeVtec
Full Access Member
Can you post pictures of the fitment installed? I'd like to know if there are noticeable gaps anywhere. Thanks in advance.
MACHO
Full Access Member
PURCHASED...aaaaaaaaaaaaand shipped to Vegasf6 for modification! Should be there Friday!
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Everything went well?
MACHO
Full Access Member
Yes sir. The eBay action just added more to their "inventory". I bought it and sent it directly to Chris (vegasf6) to get modded which saved me the shipping. Chris has been very communicative and excellent to work with in explaining the modification and coordinating this.
Can anyone who's received theirs comment on if the black paint is of decent quality and matches the OEM paint well (if you have a black truck)?
Can anyone who's received theirs comment on if the black paint is of decent quality and matches the OEM paint well (if you have a black truck)?
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Well I remember you saying he said to wait until he finished the first memebers so I was wondering how that went!
MACHO
Full Access Member
Ah yes... It wasn't a problem. The procedure is identical the mod of the OEM
Blazed
Accepting Donations
- Joined
- Dec 20, 2010
- Posts
- 4,243
- Reaction score
- 10
Well good then!
Hi guys, I am the one undertaking the mod for Macho. I wanted to wait until I had at least one of these in my hands before I took on anymore, and Rob was gracious enough to be my guinea pig 
I am still in the early phases of the modification but I can confidently say I can open these up in a manner similar to the OEM. The clearances are a little tighter and it did make it more difficult. Also, there is a dimpled finish on the body of the light that is going to make my finish body work less neat, unfortunately. It will not show when the light is installed, but I do like to do as neat a job as possible.
I don't really have a lot to add at this time, perhaps I will document this modification, but in the past I have left it up to the customer to decide what he chooses to share.
-Chris
I am still in the early phases of the modification but I can confidently say I can open these up in a manner similar to the OEM. The clearances are a little tighter and it did make it more difficult. Also, there is a dimpled finish on the body of the light that is going to make my finish body work less neat, unfortunately. It will not show when the light is installed, but I do like to do as neat a job as possible.
I don't really have a lot to add at this time, perhaps I will document this modification, but in the past I have left it up to the customer to decide what he chooses to share.
-Chris
