shock replacement

[Davidb5303]

I know this has been asked a number of times but here goes...Yukon Denali XL 03...rear bag shocks are junk and imagine the compressor is too. Fronts are original at 160,000. So do i buy a Arnott KIT-0007 for $700 and change whole system, or a Bilstien 4600 kit with new rear springs for $350 or just buy some HD monroe's and new Moog rear springs? Not really going to tow. Whats the consensus for a "decent" ride? THanks

 

[01ssreda4]

Dont need new springs bud, they ride fine without the rear leveling crap on them. Buy a set of 4600s and fahgettabout it.

 

[Davidb5303]

Dont need new springs bud, they ride fine without the rear leveling crap on them. Buy a set of 4600s and fahgettabout it.

Thanks...will look up Bilstein 4600 numbers and get them coming

 

[TheAutumnWind]

Dont need new springs bud, they ride fine without the rear leveling crap on them. Buy a set of 4600s and fahgettabout it.

Personally Mine was way too soft in the rear with the original springs. I've got a lot of mileage, and I assume a lot of mileage with blown bags so maybe that is why, but I really had to replace the springs.

+1 for 4600's

 

[01ssreda4]

Personally Mine was way too soft in the rear with the original springs. I've got a lot of mileage, and I assume a lot of mileage with blown bags so maybe that is why, but I really had to replace the springs.

+1 for 4600's

Mine were stiff enough to tolerate my car hauler loaded so I dunno.