Some Pics of my Yukon XL on 20 x 9 Monsters with 35 x 12.50

[Sir-Lancelot]

So with the 60769 helper bags, do those go in the spring and I air to the lift I need? Would you think I could get another 1.5" with them? That would put me level if I am measuring the fenders to the ground.
Are these the bags you are suggesting?

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=350336753256&crlp=1_263602_263622&ff4=263602_263622&viewitem=&guid=234025231280a0265387a847fff96ad4&rvr_id=&ua=%3F*I8&itemid=350336753256

I did grind the bracket a little bit already so it does not rub at all now now, but how much will the bags move the axle toward the drivers side? I hope none.

I have the bilstein's on the list already, as well as a steering stabilizer.

I appreciate your help Max!

 

[Max]

Yes, those are the correct bags. Depending on how much psi you run it shouldn't pitch the axle much, I'd say 5-10psi is plenty to get the ass up a bit. Here is an old ass pic of the bags installed on my truck as well as a pic of them off the vehicle when I recently swapped coils:

 

[Sir-Lancelot]

Looks like it is worth a try. Not too much $ so looks like a plan.
Are they safe to run aired up long term?

Sorry about the 20 questions.

 

[Max]

Yes they're quite safe and improve the ride quality, I've done quite a few on customer's trucks lifted or lowered.

 

[Sir-Lancelot]

Thanks for all your help Max!

 

[Max]

No problem dude, that is what I'm here for

 

[AquinoSteven]

2" coil spacers would do the trick too. Though you can run both spacers and bags. Either one is good though.

 

[Kleen97]

So how much lift did you try to get. Cuz it does look l low maybe you could do a three inch body lift but I do like the truck dude very nice one at that

 

[Sir-Lancelot]

So how much lift did you try to get. Cuz it does look l low maybe you could do a three inch body lift but I do like the truck dude very nice one at that

Thanks!

I wanted to go 2.5 in the back, but it moved the axel towards the driver's side. I had to grind the bracket in the pic above some just to clear what I have now. 1.5.

I am hoping to get another 1.5 or 2 inches up on the rear.

Thought about a body lift and maybe down the road I will, but for now I just wanbt to try these bags Max suggested and see if I can at least get it back to level. I would be quite happy if it can.

---------- Post added at 05:58 PM ---------- Previous post was at 05:57 PM ----------

In reply to Aquino Steven, not sure why it didnt quote his post.
Tried a 2.5" and it didnt work. Rubbed way more then it does now.
Going to try the bags. Not a huge investment so WTF right? : )
Maybe the higher coil spacers would have worked since i had to grind a little anyway? I dont know.

 

[brucebruce45]

1. order 3'' spacer from ebay for 40 bucks or so
2. get 1/4'' wheels spacers to keep from rubbing on rear or
call a lift company and get the panhard bar drop bracket.
it's like 50 bucks