skyhighsami
Full Access Member
- Joined
- Mar 2, 2010
- Posts
- 403
- Reaction score
- 39
I will check that out. I do remember when we installed the kit it moved the sway bar over an inch or so
thehoe92 Lowered 3/5
- Thread starter thehoe92
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
you could start another topic on it and get a lot more help instead of posting here where its already buried and people just think I'm psycho for bumping my own drop thread even though the drop is already installed haha!
dropem94
TYF Newbie
looks good bro
skyhighsami
Full Access Member
- Joined
- Mar 2, 2010
- Posts
- 403
- Reaction score
- 39
Well, I started another thread and it didn't get much interest. Since I am asking exact questions about a 3-5 drop in a thread about a 3-5 drop I don't understand what the problem is. If someone wanted to see what a 3-5 looked like and encounted similar issues this would be a good resource thread.
nothing against you bro I'm just seeing one person help you out and was suggesting starting your own thread because mine is kinda dead so not many people are going to see your concern
so I guess I was able to go lower in the rear... a lot lower
so I guess I was able to go lower in the rear... a lot lower
BlizzardX23
Supporting Member
your shit is looooooooooooooow
I was told from DJM themselves when I bought by kit, that the 5in coils are actually made for a suburban to the spring rate is much higher, so thats why they will ride a little rougher. Because I think they also offer a 4in lowering spring exactly for the yukon. When I got my receipt it said the rear coils were for a Suburban, or a Yukon Xl so i called them and they told me about the 5in coils.
what did we measure chris..? 3 inches lower?
you want to throw those pics up I need some ninja pics for SMD
and did you leave your jack here? I didn't check but that would be sick I hate using my little ass one after using yours or clean's
---------- Post added at 11:38 PM ---------- Previous post was at 11:11 PM ----------
half way through the day
wasn't low enough.. bye bye body mounts
clean cuttin it up!!
you want to throw those pics up I need some ninja pics for SMD
and did you leave your jack here? I didn't check but that would be sick I hate using my little ass one after using yours or clean's
---------- Post added at 11:38 PM ---------- Previous post was at 11:11 PM ----------
half way through the day
wasn't low enough.. bye bye body mounts
clean cuttin it up!!
fatnlowtahoe504
Full Access Member
ok so you need to elaborate on what your doing with the bodymounts and what you are replacing them with.....
