Amaster
Full Access Member
10/11 it seems to work on my desktop.
Think of getting a mdi
- Thread starter Amaster
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Amaster
Full Access Member
I'm still getting the error but atheist the tech2 is reacting
swathdiver
Full Access Member
ACDelco also has processor speed and installed memory requirements that you have to meet. Joe taught me that we can only use the Tech-2 as a pass-thru device now, either run a 100 foot CAT5 from the PC out to the Tech-2 at the car or get a new laptop in my case.
One would think that a message would generate if the computer was not "compatible" with the SPS2 system...but then again, I am thinking logically! I posted yesterday that I was having an issue with my Tech2 and getting the same error as OP. Using an older Core2Duo laptop, 6GB RAM, Win10 to test with. I guess I will take my laptop out to test - mine is an I7, 16GB, Win10 and see if the results are any different.
So, no change with the other laptop but a different error. E9043 is what I am getting now, sadly!
Amaster
Full Access Member
My laptop has 5gb of ram so I'm guessing I'm going to have to get ram cards it goes and acts like will connect through the tech2 but then the error
I tried to use the Tech2 with 2 different laptops (1 had 6GB and 1 with 16GB) without success.
See my posting under Tech Info section for a show and tell of MDI device
www.tahoeyukonforum.com
Tech2 and SPS2 programing
I am an owner of a Tech2 diagnostic tool and after countless hours of trying to get the unit to serve as a pass through, I began reading and researching why the GM SPS site would not working with the tool. After reading on several sites, including our own, I learned that GM had changed the site...
www.tahoeyukonforum.com
call tech support, (during business hours -eastern time) it's included with your price paid for programming/subscription
1-888-212-8959
I was encouraged to call as well - hate talking to call center support so that option was not for me. Others may be willing to go that route but I didn't want to have to call every time I wanted to use the SPS site - my preference only no reflection of the advise given.
Similar threads
