08z71bgm
Supporting Member
Mine was a plain white box with a tru cool sticker on it.
Tru-Cool Max 40k Transmission Cooler
- Thread starter Jlaughtr
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
Jlaughtr
Full Access Member
Finally got the tranny cooler installed. Pretty simple plug and play. The worst part is changing the fittings on the transmission for the new AN fittings. There’s zero room up there.
now just need to order a new dash with the tranny temp gauge
now just need to order a new dash with the tranny temp gauge
Did you get an Owwwwweeeyyyyy!
OP
OP
Jlaughtr
Full Access Member
Haha no. That’s just a picture of my fat hand I had to get in a very tight space
Been there and definitely done that. I have the owwweeeyyy'ssss to prove it.
alpha_omega
Full Access Member
Do you have any pictures of the SS lines installed? Did you run SS from the cooler to the trans, or did you get the shorter lines that run into the existing tranny lines. I didn’t even think they made the latter of the two but to my surprise I think someone who didn’t want to deal with the “fat hand” issue came up with a easier/cheaper method.
Any issues or signs of leaking from the radiator where you did the bypass?
I have my 40k (w/ cold weather bypass) on hand and am trying to decide if I should run new Tranny lines, order the braided SS or just use the hose that came with the kit.
2011 Yukon Denali 6.2l
ROGELIO A GUZMAN
Full Access Member
So do we bypass the radiator or not. Getting me 40k soon.
ivin74
05 NBS Nali
ROGELIO A GUZMAN
Full Access Member
Oh yeah boys. It's here. 
Sent from my LM-V600 using Tapatalk
Sent from my LM-V600 using Tapatalk
S33k3r
Full Access Member
Did you get the kit someone on GM Performance sells that includes the hoses and the fittings?
