Upgrades that wont leave you broke...

["350Vortec"]

or

B&M Shift kit...does all shifts...from 1-4 or 5.

under $40 if I recall

Since were talkin about pro-long tranny life...

Tranny Cooler!

---------- Post added at 02:32 AM ---------- Previous post was at 02:31 AM ----------

160 tstat too

Is this the kit you mean? http://cgi.ebay.com/ebaymotors/B-M-...5fAccessoriesQQsalenotsupported#ht_2546wt_899 Have you ever felt a stock 4L60E after this kit installed?

 

[foreverfalcon40]

I got one in the ESCAHOE...***** BEAUTIFUL! If I get a chance I take a vid and post it...if I recall shifts at 5k or 6

 

[GreyFox]

Yeah the drums i was probably gonna skip.
In the home stretch of a tune up. just have to get a tranny flush.
Used A/C delco platinum plugs. $50
Delco wanted too much for wires so i resorted to MSD wires For $110 after tax.
I have shocks just have to put them on (that and idler and pittman arm). Hard to do?
Brakes are what I'm researching right now the backs squeak and the pedal is "mushy" at times. I'm thinking cheap shoes and worn out drums.
Oh... Wangner thermo Quiets $50

 

[Rollin Thunder]

I got one in the ESCAHOE...***** BEAUTIFUL! If I get a chance I take a vid and post it...if I recall shifts at 5k or 6

if it shifts at five your missing a few revs. Silverado does not shift until like 6200.

 

[foreverfalcon40]

if it shifts at five your missing a few revs. Silverado does not shift until like 6200.

I can set it higher, but I have 10yr old truck. with 105 on the clock with the 60e

I can even set my revs with MSD Box too.

 

[AtomicHoe094]

these trucks weren't made to shift that high..

 

[Rollin Thunder]

these trucks weren't made to shift that high..

thanks to bb tune mine does. I just guesstimating since the tach stops at 6 and it takes about 1.5 seconds after it hits 6k to shift.

 

[TahoeGoBoom]

thanks to bb tune mine does. I just guesstimating since the tach stops at 6 and it takes about 1.5 seconds after it hits 6k to shift.

your truck must not pull at ALL top end if it takes 1.5 seconds to go up 200 rpms.

 

[Rollin Thunder]

your truck must not pull at ALL top end if it takes 1.5 seconds to go up 200 rpms.

lol IDk. I have to watch it. All I know is it sits with the neddle pegged at 6000 revs before it shifts. I just need to get a seperate tac.

 

[96ProCompTahoe]

so we taking bets as to when the silverado is going to break something? haha j/k.