What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Tonyrodz]

Rouge signal perhaps? lol

No doubt.

 

[mountie]

No doubt.

Butt dialed the button?

I've done that with my Infiniti fob. ( Unlock button)

 

[live2pull]

Still looks pretty good.

Came out great. I have same exact chip in my van's windshield.

I installed a remote start years ago on a Camry. Went into Target to shop for about an hr, came out and the car was running. Never figured that one out.

I am happy with the repair, plus it is behind the mirror so I won't see it. I am just being a perfectionist. I just think some things could have contributed to a better result. I think widening the hole in the chip to help the resin flow into the chip. Also, it has been overcast in Phoenix the past couple days, so maybe picking up a UV flashlight would have helped.

 

[iamdub]

I want to mod a rear washer line to make a hidden squirter to **** with people and tailgaters.

Did something similar in high school. My brother had an '83 Olds Omega. The hood ornament was the Omega ("Ohm") symbol. Just for kicks one day, I routed the windshield washer hose through the crack in the hood and through the Omega emblem. It pinched the hose just tight enough to hold it in place while squeezing it to get a little more pressure out of it. We'd piss on the back of the buses with it when we left school.

 

[iamdub]

Rouge signal perhaps? lol

Probably more towards fuchsia than rouge.

 

[HiHoeSilver]

Probably more towards fuchsia than rouge.

It's Tony. I'm saying candy apple red.

 

[3Dog]

Cranked my torsion bar on the drivers side to get rid of a one inch port-side lean on my otherwise stock Z71. Got about 3/4" to 7/8" of it corrected, much better. Probably should get an alignment just in case.

 

[AlejandroDinero]

Installed Led Head/Fog/Marker/Turn Lights, Installed New Crystal Clear Headlight and Turn Signal Housings. I wish I would have known about the Depo headlights and ordered them but oh well these are fine for now. I ordered a LED interior kit also but due to the kit being non canbus they are not being installed. Put new pioneer door speakers in the doors. Stuck between lowering it and lifting it even though it’s a 2wd. Next after fixing my no heat issue and my passenger rear window being stuck half way down going to tint and do something with the suspension.

 

[mountie]

Installed Led Head/Fog/Marker/Turn Lights, Installed New Crystal Clear Headlight and Turn Signal Housings. I wish I would have known about the Depo headlights and ordered them but oh well these are fine for now. I ordered a LED interior kit also but due to the kit being non canbus they are not being installed. Put new pioneer door speakers in the doors. Stuck between lowering it and lifting it even though it’s a 2wd. Next after fixing my no heat issue and my passenger rear window being stuck half way down going to tint and do something with the suspension.

View attachment 236227 View attachment 236229

I had the same window problem on my Yukon. I got a complete window assy for less than $85 bucks at O'reily Autoparts. Took less than an hour & a half to R&R, and has been working perfect.
Lifetime warranty too. ( Carbone brand I think)

 

[HiHoeSilver]

Installed Led Head/Fog/Marker/Turn Lights, Installed New Crystal Clear Headlight and Turn Signal Housings. I wish I would have known about the Depo headlights and ordered them but oh well these are fine for now. I ordered a LED interior kit also but due to the kit being non canbus they are not being installed. Put new pioneer door speakers in the doors. Stuck between lowering it and lifting it even though it’s a 2wd. Next after fixing my no heat issue and my passenger rear window being stuck half way down going to tint and do something with the suspension.

View attachment 236227 View attachment 236229

Your truck doesn't care about canbus. Put them bad boys in!