What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Rocket Man]

When starting my truck it took a couple cranks before turning over, it wasn't bad but noticeable.. for a while i just simply clicked the key to power let the fuel pump prime for a moment before starting.
I replaced it with an acdelco.
Ill try and check proper fuel pressure thanks for the tip. Also gonna try and put the old one back in see if there's a difference.

Your fuel pump might be going out too.

 

[live2pull]

Drove the Yukon to work today, turned up the radio so it was easier to ignore the failing pitman arm and the overdue trans fluid service.

 

[mattbta]

Ordered a powerstop front kit for my daughter's Camaro from Rock Auto. Missing the brake lube and the pads were clearly opened, test fit, and returned then shipped to me!!! WTF? This is my second and last order from them, ever. First order was an Energy Suspension poly trans mount that was missing a bracket. I know they're highly regarded around here, but I'll spend my money elsewhere even if it is more expensive.

 

[clandr1]

Got her a pair of powerstop Z17 front pads for my 2020+ 4 piston brake caliper swap. One of these days the current brakes will start squeaking so I can justify the swap

@blueinkd How are you liking the Z17 pads so far? I'm trying to decide between Z17 STOCK REPLACEMENT BRAKE KIT and Z23 EVOLUTION SPORT BRAKE UPGRADE KIT.
Thanks!

 

[05Single]

I finally bought a dash cam the other day. Pretty happy with it so far, if anyone is interested, here it is: Kenwood DRV-A301W HD dash cam... https://www.amazon.com/dp/B07XQMVGLY?ref=ppx_pop_mob_ap_share

The hardline power kit came yesterday, so got that put in today.

View attachment 341098
View attachment 341099
View attachment 341100
View attachment 341101

Nicely tucked away...

Pretty happy with how it came out.

View attachment 341102
View attachment 341103

Oh, and I’ve been sitting on this shifter boot for like 6 months (just for you @Rocket Man [emoji1787]).. after I installed the 2019 shifter, got it all how I wanted it, but my boot was just shot. So ordered a replacement, but it’s a bit of a PITA to take everything back out, and redo it all, to put the new boot on. Finally decided to do that today, so that little project is finally all buttoned up.

View attachment 341104
View attachment 341105
View attachment 341106
View attachment 341107
View attachment 341108
View attachment 341109

Now I have a 2019 shifter boot.. only used for 6 months.. if anyone needs one. [emoji16][emoji106]

View attachment 341110
View attachment 341111

Little late but got a part number for that boot bud? Mines a little worn out.

 

[treehan77]

Doing some touchup with the AC delco paint pen that was on sale for $14. So far just cleaned the rust out and applied the white. Gotta rub it out and clear still. Probably did 60 spots so far , probably 45 behind the rear wheels

 

[Sam Harris]

Little late but got a part number for that boot bud? Mines a little worn out. View attachment 377249

Man, that thing looks sad..! 26093753

OEM NEW Column Transmission Shifter Lever Boot 99-09 GM Truck SUV VAN 26093753 | eBay

Genuine GM Part Number: 26093753. Transmission Shifter Lever Boot is a direct fit for the following 1999-2006 GMC Sierra 1500. 2000-2004 GMC Jimmy. 2000-2004 Chevrolet S-10 Blazer. 2000-2004 Chevrolet S-10.

www.ebay.com

Genuine GM 26093753 Automatic Transmission Control Lever Housing Seal
https://a.co/d/3fwHDFz

But personally, I dig the new angle, and color, etc.. of the “Maple Sugar” shifter I put in from a 2018-2019 Esky:

84171609 | eBay

Find many great new & used options and get the best deals for 84171609 at the best online prices at eBay! Free shipping for many products!

www.ebay.com

ETA: man, these have gone way up (like everything else..!) I paid about $75 for mine. Of course, you’ll have to swap the rubber boot with the correct one for GMT800 (26093753), and I doubt this color would work with your interior. (Or is that a tan interior…?) The description in that ad is pretty funny..

 

[Sam Harris]

Doing some touchup with the AC delco paint pen that was on sale for $14. So far just cleaned the rust out and applied the white. Gotta rub it out and clear still. Probably did 60 spots so far , probably 45 behind the rear wheels

Nice..! I need to do this badly..! How do you plan to do the final and clear..? I suck at paint, and gave up on touch ups years ago..

 

[MassHoe04]

Nice..! I need to do this badly..! How do you plan to do the final and clear..? I suck at paint, and gave up on touch ups years ago..

Hah! I need rocker panels before I worry about touch-ups! If and when I do replace them, I am afraid my fuel mileage will suffer from carrying the added weight... LOL

 

[NoReverseYukon]

What I need to do... I noticed that the little lightbulbs in my driver's side switches stopped working. I found a YT video of how to replace the bulbs, but his method is rather primitive.

There must be a better way.