What did you do to your NBS GMT800 Tahoe/Yukon Today?

[blueinkd]

https://www.rockauto.com/?carcode=1431156&parttype=12406 your thinking right, i got the precision brand, 36 bucks for the pair. they got a few combos. all 4, inside outside ect ect.

That's nice!!@ i appreciate that info. I didn't think these were that cheap!?!?

 

[Fless]

That's nice!!@ i appreciate that info. I didn't think these were that cheap!?!?

Don't forget to use a current 5% discount code. This thread is consistently updated with new codes:

Rock Auto Discount Codes - Post 'em Here for Others to Use

228445624203221378 5-5-23

www.tahoeyukonforum.com

 

[Scott in AZ]

Drive thru the forest up to the Trailhead for some mountain biking. Days like this when it all comes together and the projects in the garage worth every penny and every minute.

 

[S33k3r]

bought a pair of front outer window scraper/seals, two pass side regulator motors. already have all 4 new regulators i got them years ago just waiting for the day i needed them. one is dead. one is slow. one squeals.....

now to see how long i put off doing the work..... need to open up 3 doors replace 3 regulators and the 2 seals and i also got a new driver side heated seat, seat memory, pedal switch as every time it rains my heated seat comes on full heat and wont turn off. bet the shot seal lead to that BS. junk dont even touch the glass.

I've read that dust builds up on the circuit board, and shorts when it gets overly humid/wet. Might be able to reuse the existing switch after resealing the door

 

[Scottydoggs]

That's nice!!@ i appreciate that info. I didn't think these were that cheap!?!?

last time i was looking for em they were like 70 a pop. that was like 4 years ago now. at 37 bucks i jumped on em.

 

[Scottydoggs]

I've read that dust builds up on the circuit board, and shorts when it gets overly humid/wet. Might be able to reuse the existing switch after resealing the door

i was thinking the new seal might help. but then figured wet electronics. replace it....

 

[RAMurphy]

My 2002 Tahoe just entered the 300K club.

 

[915_Tahoe]

Idler arm w/bracket and pitman arm came in early Saturday. Swapped them both out, got it aligned on Sunday. Was told I need to replace the guide pins as they where damaged, so need to get those ordered and get another alignment.
Also replaced the rear brakes cause they were squealing really bad, turn out the driver inner pad had uneven wear and the indicator was scratching the disc. All done now, let see what she decides for me to fix next.

 

[Electrician]

A peak at my gauge cluster "work shop"

 

[S33k3r]

A peak at my gauge cluster "work shop"

That looks more like a project list...