What did you do to your NBS GMT800 Tahoe/Yukon Today?

[OhFourChevy]

So the auto headlights blow ballasts?

I just disabled auto headlights and my ballasts quit blowing. No relay needed on mine.

 

[TheAutumnWind]

Changed my oil, diff fluid, discovered a leak somewhere in my windshield wiper fluid reservoir, so I'll do some investigating some time tomorrow, my LED bars will be in tomorrow as well, so I'll be taking apart my fog light housing to try and fit them in there.
Ordered my Black Depo projectors, DDM 35w Hids, error code cancelling(just in case) and black Depo corner lights, I think they'll go great with the whole idea I have working, I like the amber corner portion... Reason being is I actually like the look of the factory tails on my white and black Tahoe.

Windshield wiper fluid reservoir's tend to leak. Mine has never held fluid...

 

[BigDaddy13440]

Windshield wiper fluid reservoir's tend to leak. Mine has never held fluid...

Mine leaked after I trimmed through the wheelwell liner with a sawzall.

 

[DarkBlueHoe95]

Finally picked up and installed z71 rear springs. Gave me roughly 2 inches of life. Ride is much more enjoyable now being a bit more firm. Just need new shocks and sway bar end links and I'll be good to go. Also need to reaim my headlights, they are printed straight at the ground.
Before

After

Pics don't do the change justice



Sent from my SM-G930V using Tapatalk

 

[pnwdan]

So the auto headlights blow ballasts?

Mine never have. I run 55w though

 

[OhFourChevy]

Thanks! I don't think it should make a difference too much between the 35w and 55w and ballast life

Mine never have. I run 55w though

 

[Rivieraracing]

So the auto headlights blow ballasts?

I'm only on my second set of HID's and the first ones lasted 6 years, might be a case by case problem from one truck to another

 

[OhFourChevy]

I'm only on my second set of HID's and the first ones lasted 6 years, might be a case by case problem from one truck to another

What kit do you use?

 

[nharkey85]

So a relay harness ?

It's an add on harness, but not the main power relay harness. It's vaguely similar to installing load resistors on led turn signal bulbs.

Like the anti flicker capacitors that some companies offer.

 

[#1taho]

I used cheep HIDs and I have transferred then three times. The taho is the third. They must be at least 6-7 years old by now. Still no problems and no harnness. I wonder if it's brand specific for these problems. I never expected mine to last this long and still be bright.