What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

MadDogDelpho

Texcellent
Joined
Nov 20, 2016
Posts
1,690
Reaction score
2,294
Location
Texas
Also a question for the 4wd guys; has anyone converted from the pushbutton 4wd to the manual shift 4wd? Just an idea bouncing around in my head :D
 

Smoke Em All

Full Access Member
Joined
Jun 14, 2014
Posts
355
Reaction score
165
Location
Taylor,Texas
As far as damage I got relatively lucky.
Hub assy of course
Pads and rotor
Caliper bracket
And hose.

I expected the lower ball joint to be trashed but it was almost as it it were un-touched. I think it just had so much junk caked up on it that it was protected lol.
Thanks for the well wishes also. It was a pretty hectic 8-10 seconds.


Sent from my iPad using Tapatalk
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
As far as damage I got relatively lucky.
Hub assy of course
Pads and rotor
Caliper bracket
And hose.

I expected the lower ball joint to be trashed but it was almost as it it were un-touched. I think it just had so much junk caked up on it that it was protected lol.
Thanks for the well wishes also. It was a pretty hectic 8-10 seconds.


Sent from my iPad using Tapatalk
Sounds like you were lucky all around. Glad you're OK.
 

05Single

afraid of the dark
Joined
Feb 26, 2015
Posts
8,186
Reaction score
11,456
As far as damage I got relatively lucky.
Hub assy of course
Pads and rotor
Caliper bracket
And hose.

I expected the lower ball joint to be trashed but it was almost as it it were un-touched. I think it just had so much junk caked up on it that it was protected lol.
Thanks for the well wishes also. It was a pretty hectic 8-10 seconds.


Sent from my iPad using Tapatalk
Holy crap your pants batman!
That's not a good day but we're all glad your still with us, could've been way worse.
 

Cattivo

Full Access Member
Joined
Dec 21, 2016
Posts
1,251
Reaction score
2,207
Location
The Concrete Jungle
Just a few days late but Saturday I replaced my passenger side wheel bearing after realizing it was the front diff making all the grinding. I had posted already about doing the 4x4 delete. Well Monday on my way to work the driver side bearing completely exploded at about 75mph taking me for a 3 wheel brake less ride towards the ditch and my wheel, caliper, and rotor went towards oncoming traffic. Luckily it didn't hit anything and I'm good also. If the 4x4 were still in the truck I wouldn't have lost the wheel with the cv axle as a fail safe but it made me think. On the 2wd trucks there is no fail safe. Do not neglect your bearings. Now I'm going to be checking them all periodically. The driver side gave me no warnings as far as sounds or shaking so don't just wait for that to know it's broken.
Sent from my iPad using Tapatalk

Glad you're ok brother
 

Forum statistics

Threads
132,377
Posts
1,867,020
Members
97,014
Latest member
AustinC

Latest posts

Top