What did you do to your NBS GMT800 Tahoe/Yukon Today?

[Keviebear86]

NNBS upgrade is front rotors, calipers & brackets, pads from the GMT900 (07-14) trucks. It is straight bolt on. The rotors are 13" so you do need a minimum of 17" wheels to run them. Here's a good thread, there are a few more as well. The SS lines have also proven very beneficial.

https://www.tahoeyukonforum.com/threads/07-brake-upgrade-on-a-00-06-nbs-is-it-worth-it.81497/

Perfect. My rotors are warped already so I had planned on replacing the fronts soon. I have Hostile Sprocket 20" wheels so I'm sure I have plenty of clearance for the rotors. Looks like I'll be doing this upgrade sooner than expected! Now I just have to source the SS lines.

 

[HiHoeSilver]

Perfect. My rotors are warped already so I had planned on replacing the fronts soon. I have Hostile Sprocket 20" wheels so I'm sure I have plenty of clearance for the rotors. Looks like I'll be doing this upgrade sooner than expected! Now I just have to source the SS lines.

The most common lines are stop tech, power stop, or Goodridge.

DO IT!

 

[brian.roberts.1293]

Perfect. My rotors are warped already so I had planned on replacing the fronts soon. I have Hostile Sprocket 20" wheels so I'm sure I have plenty of clearance for the rotors. Looks like I'll be doing this upgrade sooner than expected! Now I just have to source the SS lines.

Yeah I'm working on finding everything myself. I was looking on rock auto and a few others. A lot of them sell the calipers and you get the brackets and hardware with it. Make sure it says they come with it. Then all you need is rotors and pads. To do the swap and then the ss lines for good measure.

Sent from my SM-N960U using Tapatalk

 

[Keviebear86]

Now the question is, do I get the SS lines for the 2000-2006 or 2007-2014 Tahoe?

 

[Bombsquad85]

Now the question is, do I get the SS lines for the 2000-2006 or 2007-2014 Tahoe?

Pretty sure you stick with 00-06

 

[HiHoeSilver]

Pretty sure you stick with 00-06

Agreed. And check your rpo brake code. There's a 5 and 6 line kit depending. You either have one or two lines up over the rear axle.

 

[Scottydoggs]

Yeah, thx to Christie. He bumped the gas tax up by .25 or .24 cents a gal.

Shit, your gas is almost as much as ours now, i would take to trip out 84 to pa, then shoot off 1st exit into jersey which was cheap asf.... or if coming up from gsp, 17 or 287 and make sure i filled up right before state line....years ago.....

that was many years ago. i sold my 03 gmc 2500 hd when reg 87 broke 5 bucks a gallon. and that was 8 or 9 years ago now easy. Sasquatch here , my brother, he used to hit the state line on 17 and gas up as well, its not been worth the trip for a long long time now.

Yeah, thx to Christie. He bumped the gas tax up by .25 or .24 cents a gal.

classic BS tax too. when you voted that tax had a question that was written so you voted wrong. cleaver douche bags they are. it was either yes or no, should the gas tax be used for all transit aka trains. or just the roads and bridges......trains dont run on gas, i dont ride a train, and the roads and bridges need real re building bad. but the dumb ***** in this state voted to use it all over. and im not seeing to much rebuilding going on here. im still wondering who the hell gets to pocket all them billions they are collecting.

and you know they will never drop that tax now that its here, just like the tpk and parkway, the tolls will be gone after its all paid for, tolls never left, the tolls went up and up too. all BS and lies.

 

[TheAutumnWind]

You complain at all?

not yet, but I intend to.

just sent a complaint it says they will get back to me in a day. We shall see.

 

[TheAutumnWind]

Agreed. And check your rpo brake code. There's a 5 and 6 line kit depending. You either have one or two lines up over the rear axle.

JL4 has 6 lines two over the rear axle rather then one.

 

[bottomline2000]

More of big company's deceptive practices. I think @Rocket Man had a similar experience with them. On the stock seats, sides are vinyl, and the tops are leather. So, leather seating surfaces. They do look good on your Hoe. How were the clips? Good, or did they suk?

I've been to their shop [Seat Shop] and they are a mom and pop type operation at best. Looked like 3-4 people taking orders and one of the owners shop dog laid out in the floor lol. There is no actual store front and when you walk in you walk right into where their office desks are. They had a lot of stuff just laying around labeled "competitor" so it would be unfortunate if he actually got something that's not their product. I only got seat foam from them and that worked out well.

Sent from my SAMSUNG-SM-T377A using Tapatalk