CDNTAHOE
Full Access Member
Just did stock on the muffler I like the quiet little rumble but quiet.
What did you do to your NBS GMT800 Tahoe/Yukon Today?
- Thread starter vwbeaner
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
HiHoeSilver
Away!
Reaching back a bit here, but...
Dammit @Fosscore:
Of course it will be sanded smooth and perfect before final clear and installed...
Dammit @Rocket Man:
Dammit @Fosscore:
Of course it will be sanded smooth and perfect before final clear and installed...
Dammit @Rocket Man:
eand28
Full Access Member
What is that? (And not the spare tire cover)
HiHoeSilver
Away!
The one-time use crimp ring for the spare tire tube. I reused the original last time and it just plain doesn't stay tight.
I hate those things.
SnowDrifter
Full Access Member
- Joined
- Sep 5, 2016
- Posts
- 2,439
- Reaction score
- 2,681
Cabin filter. Got the fart proof ones
All set for taco Tuesday!
All set for taco Tuesday!
Tonyrodz
Resident Resident
That's what she said
Fixed the 4x4 mode.
Before if I selected 4x4 mode, the mode light on the switch changed to that, but the Tech 2 indicated that it switches for a second to 4x4, then goes to Auto. Same in 4LO, it gears down but not in 4wd. Functionally that's the way it was working (as Auto, never full time 4x4), but the switch doesn't indicate that. No DTC codes for the transfer case. Weird.
So, after some tests pulling propshafts, etc., replacing the encoder motor on the transfer case fixed it, and now when I switch it to 4x4 all four wheels engage full time. If I didn't have the Tech 2 I'd have just been guessing.
Before if I selected 4x4 mode, the mode light on the switch changed to that, but the Tech 2 indicated that it switches for a second to 4x4, then goes to Auto. Same in 4LO, it gears down but not in 4wd. Functionally that's the way it was working (as Auto, never full time 4x4), but the switch doesn't indicate that. No DTC codes for the transfer case. Weird.
So, after some tests pulling propshafts, etc., replacing the encoder motor on the transfer case fixed it, and now when I switch it to 4x4 all four wheels engage full time. If I didn't have the Tech 2 I'd have just been guessing.
camaroz2887
Member
Sayin goodbye to an old friend. The 03 z71 I learned to drive in when my mother owned it. It worked it’s way into my sister in-law’s possession and finally after 311,000ish miles she was gettin tired.
Salvaging parts with any cost and scrapping the rest. I really am surprised at how few issues this platform had since 05 when she got it.
Salvaging parts with any cost and scrapping the rest. I really am surprised at how few issues this platform had since 05 when she got it.
Last edited:
Similar threads
