What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

DurrtyBurB

Member
Joined
Jun 8, 2020
Posts
43
Reaction score
144
Location
AZ
@DurrtyBurB : if you found a new way to skin a cat, please think about posting a guide including what specific parts you are using. It will be welcome information.
Definitely working that. Just working out all the details. Now looking for a switched 12V so the fans only run when the engine is running. Haven’t found any posts about that.
 

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,427
Reaction score
14,911
Location
Texas
Got some cutting to do...

16f4e3b0d2d91cbf3acfb7928d16bbff.jpg


Also pulled the dash apart again, so I could data log for BBP.. have to pull 3 fuses to get it to read correctly. Black Bear says my gas is less than stellar quality.. not sure what to use. I always run E85, and here (Denver), that means I fill up at *** & Go, since they have the E85 market cornered in these parts.. I believe they are supposed to be top tier fuels, but any suggestions are welcome. I filled the last 2 tanks with unleaded 91 octane, since BB wanted a data log with the 91 octane. Hope the log reveals something.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
Got some cutting to do...

16f4e3b0d2d91cbf3acfb7928d16bbff.jpg


Also pulled the dash apart again, so I could data log for BBP.. have to pull 3 fuses to get it to read correctly. Black Bear says my gas is less than stellar quality.. not sure what to use. I always run E85, and here (Denver), that means I fill up at *** & Go, since they have the E85 market cornered in these parts.. I believe they are supposed to be top tier fuels, but any suggestions are welcome. I filled the last 2 tanks with unleaded 91 octane, since BB wanted a data log with the 91 octane. Hope the log reveals something.
Why do you have to pull the dash apart to data log? Are there fuses you can’t get to without that?
 

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,427
Reaction score
14,911
Location
Texas
Why do you have to pull the dash apart to data log? Are there fuses you can’t get to without that?
Yup. I have to pull the radio (underhood), but also the 2 for the remote start, which are in the lower dash. [emoji19]
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
Yup. I have to pull the radio (underhood), but also the 2 for the remote start, which are in the lower dash. [emoji19]
Those should be located behind the interior fuse box cover where you can get to them. Who installed that? They can be relocated. Fuses shouldn’t be in an inaccessible location. Why not move them, Sam?
 

Bear77

Full Access Member
Joined
Aug 9, 2017
Posts
557
Reaction score
756
Location
South FL
Those should be located behind the interior fuse box cover where you can get to them. Who installed that? They can be relocated. Fuses shouldn’t be in an inaccessible location. Why not move them, Sam?
What Mark said! It’s got to be a PITA to take the dash apart every time just to get those fuses out for data logs...


Sent from my iPhone using Tapatalk
 

Sam Harris

Supporting Member
Joined
Sep 26, 2018
Posts
7,427
Reaction score
14,911
Location
Texas
Those should be located behind the interior fuse box cover where you can get to them. Who installed that? They can be relocated. Fuses shouldn’t be in an inaccessible location. Why not move them, Sam?
Yeah, I should move them.. just haven’t done it. Good idea though. Another project to get done! [emoji16][emoji106] I have a long list of work to do on the Yukon, and my grandmother-in-law is moving in Saturday! [emoji15] we’re giving up our main level master, so she doesn’t have to deal with stairs, and retreating to the basement.. which also means I need to finish the bathroom down there ASAP! Been painting the house for a couple weeks now in spare time. It’s going to be a ride!
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
Yeah, I should move them.. just haven’t done it. Good idea though. Another project to get done! [emoji16][emoji106] I have a long list of work to do on the Yukon, and my grandmother-in-law is moving in Saturday! [emoji15] we’re giving up our main level master, so she doesn’t have to deal with stairs, and retreating to the basement.. which also means I need to finish the bathroom down there ASAP! Been painting the house for a couple weeks now in spare time. It’s going to be a ride!
Oh boy. My hat's off to your generosity. :sunot:
 

Forum statistics

Threads
132,394
Posts
1,867,359
Members
97,043
Latest member
zachdacoo

Latest posts

Top