What did you do to your NBS GMT800 Tahoe/Yukon Today?

[fasteddy]

Probably ment 80 each? Or got the entry level moog arms as well. They were like 39 each on RA, but they also had the Problem solver arms. I be installing a set of these and moog lower ball joints end of week

Still like $42 per on Amazon
Amazon.com: MOOG RK80942 Control Arm and Ball Joint Assembly: Automotive
I would like to find a piece with easily removable ball joints, So I don't have to remove the arm and get an alignment.
Like this
Suspension Lift Kits, Leveling Kits, Body Lifts, Shocks, Ford, Chevy, Dodge, Toyota, Hummer, Off-Road Trucks - 2000-2010 GM 2500HD / 3500HD BALL JOINT UPPER A ARMS - CHEVY / GMC - LEVEL TECH Full Throttle Suspension (ftskits.com)
I wonder if those fit. They're for a 2500/3500
But at $80 compared to $700 maybe not cost effective.

 

[TxTaz]

Today, my project got the center channel, Alpine processor and amplifiers (mostly) installed. Whew!

 

[NoReverseYukon]

I use this from Hazard Fraught:

I don't think there's enough room to get a circular saw down there.

 

[blueinkd]

Today, my project got the center channel, Alpine processor and amplifiers (mostly) installed. Whew!
View attachment 274243
View attachment 274244 View attachment 274245

Looks like some nice equipment BUT my OCD would drive me nuts seeing that in the back of my rig.

 

[blueinkd]

Got my rear main seal replaced today!!!.

New flange gaskets, New front pump seal, rear booted seal on trans and got some new flex plate bolts for it. Going to do oil pan gaskets myself just cause I have it and want all New gaskets down there. Also got the pickup tube seal for it as well when I drop the pan.

 

[blueinkd]

Still like $42 per on Amazon
Amazon.com: MOOG RK80942 Control Arm and Ball Joint Assembly: Automotive
I would like to find a piece with easily removable ball joints, So I don't have to remove the arm and get an alignment.
Like this
Suspension Lift Kits, Leveling Kits, Body Lifts, Shocks, Ford, Chevy, Dodge, Toyota, Hummer, Off-Road Trucks - 2000-2010 GM 2500HD / 3500HD BALL JOINT UPPER A ARMS - CHEVY / GMC - LEVEL TECH Full Throttle Suspension (ftskits.com)
I wonder if those fit. They're for a 2500/3500
But at $80 compared to $700 maybe not cost effective.

As previously stated there are several moog lines. For a few bucks more I picked up these from RA with the matching lower ball joints. Not sure how much better these will be over the CK line.

 

[Fless]

As previously stated there are several moog lines. For a few bucks more I picked up these from RA with the matching lower ball joints. Not sure how much better these will be over the CK line.

View attachment 274254

Those ARE the CK line...

 

[TxTaz]

Looks like some nice equipment BUT my OCD would drive me nuts seeing that in the back of my rig.

LOL, the back seat is removed to make installation easier. When it is in, can't see a thing.
Taz

 

[iddqd]

If you look at their literature they state plainly that their RK series is meant to compete with the inexpensive Chinese crap that’s built the same way and priced accordingly. I understand their reasoning but wish they didn’t even try, it just puts a blemish on their name overall.

Yeah, but ALL their pitman & idler arms at least for our trucks have the same type of "boot". Am I missing something?

PS. I actually ordered Moog for my truck when I was going to do the job, but after receiving, inspecting and seeing this type of things, I had to reorder GM OEM.

 

[iamdub]

I don't think there's enough room to get a circular saw down there.

Lol
I meant the laser stuck to it to broadcast a line. It's what I use when checking alignments or just needing a straight line.