What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,702
Reaction score
47,420
Location
Central Jersey
That’s crazy. The place I was talking about doesn’t have the highest winds in Oregon, it’s that it’s a half hour or so drive from the city and is the wind I get at my house.It just slows before it gets to me as it funnels out of the Columbia River Gorge. It’s also a weird phenomenon where the wind can last for weeks at a time. Some years we don’t get it all.

The Columbus Day Storn in the 60’s was our highest but the anemometer broke at 145- it was estimated to be 175 mph. We regularly get 120+ on the coast headlands every year.
That's def a bad toupee day.
 

OR VietVet

Multnomah Falls
Supporting Member
Military
Joined
Oct 8, 2014
Posts
20,956
Reaction score
37,368
Location
Willamette Valley
On January 15-16 of 2000 there was a windstorm thru Eugene and the surrounding areas that was very very bad. I lived in Junction City, Oregon at the time and we were without power for a week. Getting home from work was a nightmare. Complete whole trees were across most roads and trying to drive home meant turning around and trying to come in from different directions. Thankfully, I had a 4x4 pickup and was able to off road a bit around trees and get home. Lots of generator noises in my neighborhood. Gusts in the area were around 80-100 mph with steady winds of close to 70-75 mph.
 

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,006
Reaction score
50,869
Location
Oregon
New rear control arms. At 230k the factory ones finally needed replacement. All new hardware goes in tomorrow. New shocks arrive Wednesday and install Friday.

View attachment 385723View attachment 385724View attachment 385725
I replaced mine at 150k just as maintenance and when I pulled the old ones I swear the bushings were like new. I decided the time was right to paint the new ones red and also I absolutely needed to replace the lower ones with Spohn boxed ones which happened to come already red. ;)
 

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,439
Reaction score
2,681
Location
Washington. The desert side not the Starbucks side
New shoes just in time for winter

They totally redesigned the tread on these. They're a hell of a lot quieter on the freeway. Will need to see how they do in snow to make a final decision

Also changed oil. Pulled a sample to send off to Blackstone. See how things look and put my money where my mouth is on my insistence regarding using 0w40. Or make a fool of myself and get a hard time from y'all. I'm good either way
 

Attachments

  • PXL_20221121_225742044.jpg
    PXL_20221121_225742044.jpg
    370.4 KB · Views: 9

MassHoe04

Full Access Member
Joined
Nov 4, 2021
Posts
1,587
Reaction score
2,820
Location
Western MA
New shoes just in time for winter

They totally redesigned the tread on these. They're a hell of a lot quieter on the freeway. Will need to see how they do in snow to make a final decision

Also changed oil. Pulled a sample to send off to Blackstone. See how things look and put my money where my mouth is on my insistence regarding using 0w40. Or make a fool of myself and get a hard time from y'all. I'm good either way
Can't see what the tires are from that angle... What make/model did you get?
 

ncalvo

Full Access Member
Joined
Jun 17, 2019
Posts
173
Reaction score
500
Location
FL
Been going crazy the last few years making my tahoe like new again.
Finally knocked out the driver side rocker. What a PITA. I used a rocker I had cut out of some guys suburban he was parting out.
Next is the passenger side but that one isn't bad at all just a couple holes, might only take a couple hours, gonna use part of a slip on rocker.
Not perfect but it is going to last!

Next on the list is new front and rear bumpers, all black, 2500hd conversion up front, and S&B body mounts.
Also replacing the pitman arm, the last piece I replaced basically everything else in the steering and suspension.
I tightened up my gear box, what a difference that made, but I think I can tighten it a little more. How tight should my steering be? There is a tad bit of play but not sure what is the normal amount.
I need a good alignment it is definitely not dialed in, still a little camber on driver wheel, but after all that is done I am finishing up with 18" silverado takeoffs and probably some mich defenders 275/65r18

What a journey this has been
 

Attachments

  • 20221120_135756.jpg
    20221120_135756.jpg
    389.4 KB · Views: 15
  • 20221121_162710.jpg
    20221121_162710.jpg
    297.5 KB · Views: 14
  • Screenshot_20220429-133135_eBay.jpg
    Screenshot_20220429-133135_eBay.jpg
    448.3 KB · Views: 13
  • 20221121_182446.jpg
    20221121_182446.jpg
    272 KB · Views: 14
  • 20221122_192359.jpg
    20221122_192359.jpg
    268.3 KB · Views: 14

SnowDrifter

Full Access Member
Joined
Sep 5, 2016
Posts
2,439
Reaction score
2,681
Location
Washington. The desert side not the Starbucks side
Can't see what the tires are from that angle... What make/model did you get?
Nokian WRG4

The ones I had previously were the WRG3 SUV. They had a directional V tread on them with a 50k mile tread life. I got 40k on them before I opted to replace them at 4/32, so, fair enough. New ones have an inside-outside omnidirectional pattern with a 60k tread life.

New pattern seems to hold up better under hard cornering too. Tread design feels less squirmy.

The old ones slapped in wet / snow. It would take an absurd amount of water at freeway speed to get me to hydroplane. Like, >1" of standing water on the freeway. In the snow? If I kicked in 4wd auto, I could plant my foot to the floor and not get any wheel spin. Only time I'd wish I had more traction was on black ice after the air temp got above freezing and it has the water layer above it. But that's studded tire territory, and I didn't encounter that often enough to outweigh the downsides of running those.

Nothing notable to say about winter performance as of yet. Had some wet weather, but nothing really 'trying.'
 

live2pull

Full Access Member
Joined
May 31, 2018
Posts
197
Reaction score
299
Location
Phoenix, Az
Nokian WRG4

The ones I had previously were the WRG3 SUV. They had a directional V tread on them with a 50k mile tread life. I got 40k on them before I opted to replace them at 4/32, so, fair enough. New ones have an inside-outside omnidirectional pattern with a 60k tread life.

New pattern seems to hold up better under hard cornering too. Tread design feels less squirmy.

The old ones slapped in wet / snow. It would take an absurd amount of water at freeway speed to get me to hydroplane. Like, >1" of standing water on the freeway. In the snow? If I kicked in 4wd auto, I could plant my foot to the floor and not get any wheel spin. Only time I'd wish I had more traction was on black ice after the air temp got above freezing and it has the water layer above it. But that's studded tire territory, and I didn't encounter that often enough to outweigh the downsides of running those.

Nothing notable to say about winter performance as of yet. Had some wet weather, but nothing really 'trying.'
With Thanksgiving tomorrow I would like to add this to my list of things to be thankful for not having to deal with.;). In addition to your previous post, I am afraid to send my oil to Blackstone........Although I probably should since i turned 200k a couple months ago.........
 

Forum statistics

Threads
132,707
Posts
1,872,924
Members
97,526
Latest member
stking
Top