What did you do to your NBS GMT800 Tahoe/Yukon Today?

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,260
Reaction score
2,725
Location
Dallas, Texas
Finished my 6.0 LS engine I started building over 1 years ago! Installed pushrods, rockers and valve covers. L96 block with Gen III reluctor and the associated mods to run it on a Gen III vehicle or ECU.

I had originally planned to swap it into my 99 Silverado, but the 5.3 I swapped (from the V6) in it is running just fine...so?
 

Attachments

  • IMG_20241212_192014558.jpg
    IMG_20241212_192014558.jpg
    329.6 KB · Views: 4
  • IMG_20241212_191508279.jpg
    IMG_20241212_191508279.jpg
    360.7 KB · Views: 3

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,260
Reaction score
2,725
Location
Dallas, Texas
I removed and wet sanded the rear taillights from my 99 Silverado. Pretty easy removal and a lot of yellowish residue came out on the sanding slurry.

I didn't use the rubbing compound that came with my 3M kit because I'll clearcoat them over the weekend when I paint the roof of my 04 project Suburban. I'm sure I'll have a few ounces left over of clear.

It's one of those little projects that literally don't take any money, except for elbow grease.
I cleared these yesterday...just reinstalled them. Not bad, eh?

I wonder if I should do the rear taillights on the suburbans now?
 

Attachments

  • IMG_20241217_131005768.jpg
    IMG_20241217_131005768.jpg
    315.9 KB · Views: 2
  • IMG_20241217_130946874.jpg
    IMG_20241217_130946874.jpg
    244.1 KB · Views: 3
  • IMG_20241216_174005236.jpg
    IMG_20241216_174005236.jpg
    170 KB · Views: 2

Keviebear86

Full Access Member
Joined
Apr 24, 2018
Posts
200
Reaction score
476
I want to start saving for Speed Engineering long tubes and y-pipe. I need to know if using O2 defoulers will save me from having a check engine light all the time? If I have to get it tuned to do this I'll just have to save for longer. Thanks for your time
 

Forum statistics

Threads
132,681
Posts
1,872,474
Members
97,485
Latest member
jrp77nj
Top