George B
¯\_(ツ)_/¯
Well, I need to slow down a bit.
While I was cleaning the wheels up a bit I noticed one wheel is of a lower quality that the other three. I am not satisfied with this. I noted the following differences from the other three wheels.
- The spoke edges are markedly sharper due to a lack of finish radius.
- The spokes are noticeably thinner that the other three.
- The face edge radius is noticeably smaller.
- The masking between the spokes for the grey paint was sloppy.
- The finish of the grey paint on the back of the wheel is rougher and the machining marks are noticeable.
I reached out to the guys I bought them from and they are working with me on it so that's a good surprise. They said we could go through as many wheels in their inventory as need to find one that matches the others. Just need to coordinate a dismount and get there.
Here are some pics
Poor Wheel Edge:
View attachment 249349
Poor Masking and Rough Finish:
View attachment 249350
Sharp Spoke Edge
View attachment 249351
Good Wheel Edge:
View attachment 249352
Good Masking:
View attachment 249353
Drove down to see these guys this afternoon. I am stunned by the level of customer service I received. They were ready for me and had a pallet with about 30 wheels on it. We opened boxes until I found the one I liked. They pulled my truck in and swapped the tire and sensor over at no charge and sent me on my way with a big thank you. I was not expecting that.
Link to the business: https://www.rpmtakeoffs.com/
They offer shipping too. Great guys!