What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[1BADI5]

It’s a ppv and on top of that he ripped a lot of weight out of it iirc.

Yes Sir, 2wd, weight reduction and 3.73s

Just changing from the PPV center console to a gutted LTZ center console saved me 25lbs......it all adds up.

 

[1BADI5]

@1BADI5, how much Torque Management, if any, is in your tune? I have a feeling that's what's killing my power. Although not as bad as stock, it still has that "VTEC" characteristic at 3,000 RPM.

I would have to ask my tuner about the amount of TQ MGMT and power enrichment he has in the tune. I know the TQ MGMT on a 4L60 is a big power grabber as I dealt with that on my Colorado, we put the value to 0 and went full send.......by doing that it did pretty much kill any traction control I had, but driver mod yo!

 

[gooffeyguy]

Yes Sir, 2wd, weight reduction and 3.73s

Just changing from the PPV center console to a gutted LTZ center console saved me 25lbs......it all adds up.

So what does the vehicle weigh currently?

 

[1BADI5]

So what does the vehicle weigh currently?

Last time I weighed is I was at 5002#

 

[1BADI5]

Pics of rebuild from last weekend.

Took me about 26 hours to complete. No surprises, only a little wear on the rockers and push rods on cyl 6, but the cam was clean with no sign of lifter failure.

 

[1BADI5]

Went from 21-26 of oil pressure at idle to now having 48-52psi at idle

 

[5strmtrp]

Trimmed off the clip's and the tabs of the bracket for front fascias lip. I think it look's better without it [emoji2373]. Also put my new headlights in. I need the fogs now.





Sent from my SM-N950U using Tapatalk

I must be missing something here, but what are u talking about Willis? Trimmed what to do what?

 

[5strmtrp]

Finally feelin well enough to get stuff done. My shoulder that got fractured in the accident is really making doing stuff a royal pain in the ass.

Managed to get the front n rear differential fluid changed, replaced my shot rear sway bar endlinks. With the help of my 15yo gargantuan son that was pretty easy. Didn’t want to pull the tires so did it on the ground with a breaker bar to break the bolts loose.

Gave it a really good wash, all the nooks n crannies. Spent 6 hours detailing the exterior, claybared the paint to get even more glue from the PO off it. Washed it again, then Mother’s waxed the piss put of it. Thankfully with the help of my son.

 

[gooffeyguy]

I must be missing something here, but what are u talking about Willis? Trimmed what to do what?

I think he's talking about that black 2-3" tall air deflector strip that runs across the bottom of the front bumper cover

Sent from my SM-G930V using Tapatalk

 

[1BADI5]

These arrived yesterday.

Spohn boxed rear LCAs with poly bushings. The bushings on the OEM LCAs are smoked.....so might as well upgrade. These are also lighter then the OEM stamped steel shit.

Improving and dropping weight where I can