What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[gooffeyguy]

Brackets for my ZR1 calipers came in........ if all goes right I will be installing them next weekend.

Just waiting on pads, banjo bolts and crush washers. I need to do a mock up tomorrow to ensure the brackets clear everything on the Belltech spindles.

So what device do you use to get your 1/4 mile and 0-60 times, and have you used that device at the track to see how accurate, or far off, it is?

 

[89Suburban]

Well if it was working fine before you messed with it, and now you’re having problems…. Maybe take another look at what you messed with to Cause the problem?… just a thought…..

It's really a simple device to disassemble, clean and put back together. If it is a circuitry problem within the 2 circuit boards themselves that is beyond my skills. Yes it is coincidental but I think that is all it is.

 

[CaptainAmerica1]

Your call.. buy some parts to throw at it. Hell my bread and butter is flying around the country fixing things people are too proud to admit they installed incorrectly….

 

[89Suburban]

Ok so I pulled the battery cable off for 20 min, grounded it. Hooked it back up. Now the window is working fine????

 

[Fless]

Here I marked the contacts that control up/down and express down. And just a pic of where the regulator harness plugs in. It’s those 6 big prongs.

View attachment 347664View attachment 347665View attachment 347666

That gold contact patch just below what looks like the Down marking looks a bit oxidized. Also, are you cleaning the mating contacts (not shown) that touch the gold patches when you hit the switch?



Take a magnifying glass and a pick and see if any of the solder joints are cracked or components are loose. Might just need to touch up the solder joints with a small soldering iron.

 

[89Suburban]

That gold contact patch just below what looks like the Down marking looks a bit oxidized. Also, are you cleaning the mating contacts (not shown) that touch the gold patches when you hit the switch?

View attachment 347676

Take a magnifying glass and a pick and see if any of the solder joints are cracked or components are loose. Might just need to touch up the solder joints with a small soldering iron.

More pics.

 

[89Suburban]

 

[pwtr02ss]

Crazy that you have to program a damn window switch. Hopefully you get it taken care of without the need

 

[Tonyrodz]

I don't think you need to program it if you buy used.

 

[ppvfan]

Poked away at some surface rust on the front fenders. Looks like I will need some splash guards after I repaint these areas. I like the way it looks now but don't want to lose this paint again. Any other ideas?

Some vinegar and a Scotchbrite pad to start with.



I'll have to take off the bumper cover to get at this better. It's the same on the other side as well.