What did you do to your NNBS GMT900 Tahoe/Yukon Today?

[Doubeleive]

I don't know why I didn't just zip them off with a carbide blade in the first place. I've been soaking the nuts in PB Blaster multiple times a day all week, and they won't budge. I was about to break out the torch and then my brain went, "hey dummy, cut them in half."

that's why I tell people to just cut the plastic heater hose connectors off when they go to replace them because 1. you are not going to re-use it, 2. they never come off "easy" ever. you will fight those things for half the day when you could have just cut them off and been done in 10 minutes.

 

[Doug118]

What kind of details can you give us on this? How big was the system and how long was it booming for, etc.

I changed the roof on the truck 2 years ago and it was doing pretty good until a few months ago. It’s right about 50,000 watts total

10lbs of sht in a 1lb bag

This poor truck is busting at the seams (literally). It’s hard to fit this much equipment and still seat 5 people but we got it done 12 10” midrange 12 tweeters 4 horns 6 15” subs ~40,000 watts total

www.tahoeyukonforum.com

 

[gooffeyguy]

I changed the roof on the truck 2 years ago and it was doing pretty good until a few months ago. It’s right about 50,000 watts total

10lbs of sht in a 1lb bag

This poor truck is busting at the seams (literally). It’s hard to fit this much equipment and still seat 5 people but we got it done 12 10” midrange 12 tweeters 4 horns 6 15” subs ~40,000 watts total

www.tahoeyukonforum.com

So it wasn't the OE roof?

 

[AUinCullman]

Hey guys. Hope everyone is doing well in this crazy heat we are having. Got my Yukon back yesterday. Ive done a lot to her since I bought it about a month ago. Mostly stuff that can't be seen. Changed all fluids, front bearings, ball joints, stabilizer bar rods, put 2" Rough Country leveling struts and shocks on the back. Stayed with my 17" rims and added 33" K02s. Before and after. I am very pleased with the handling, ride, and and almost zero road noise even up to 70mph.

 

[dkad260]

Don't know if I'm late to the party...

View attachment 405929
View attachment 405930
View attachment 405931

Just curious of this is from GM, or a specific gear vendor.

I looked around and spoke with a few people, and the info is all different, trying to narrow down a confirmed spec was almost impossible lol.

 

[t_bergman]

Got my N7-GM2007 Dynavin Pro radio installed including being able to use wireless apple car play.

Full write up on how I accomplished the wireless portion over here: https://www.tahoeyukonforum.com/thr...lay-on-dynavin-n7-gm2007-pro-nav-unit.143257/

 

[Doug118]

So it wasn't the OE roof?

It wasn’t the one that the factory put on the truck but it was an oem one from another truck

 

[89Suburban]

It wasn’t the one that the factory put on the truck but it was an oem one from another truck

I remember your posts about the roof replacement.

 

[gooffeyguy]

It wasn’t the one that the factory put on the truck but it was an oem one from another truck

Do you know of any other NNBS truck that had failed like that due to a sound system, or just yours?

 

[Doug118]

Do you know of any other NNBS truck that had failed like that due to a sound system, or just yours?

There have been a few others. The sheetmetal on these trucks rip way too easily. I have ripped well over 10 linear feet of metal in various places