She lost the fingers right after this, dead asleep
What did you do to your NNBS GMT900 Tahoe/Yukon Today?
- Thread starter phattyford
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
good question, of wolf and man it was playing random on pandora ugly kid joe station(Metallica) ~~ What track/album?
Grady_Wilson
Supporting Member
Grady_Wilson
Supporting Member
You do realize you will now be forced to share the links or descriptions for the knobs and other stuff, right?
All my knobs are in tact but a few of the auto AC buttons have worn.
I've seen the stickers but I may just send out the assembly to be redone correctly.
At around $100 it is way more than the stickers but it will look factory fresh.
She's my youngest just got tubes in her ears can't blast it too crazyMusic must not be loud enough.
Master!
Master!
Last edited:
Aye aye, I shall post an update with pictures when and if I receive the items. As a word of warning; would never type any credit card information into that site though (the amount of spam popups was alarming to say the least). Luckily they accept paypal. The sticker set was around 3 dollars if I recall correctly. They *do* have lighter socket covers as well btw. I wasn't missing them so I didn't order any.You do realize you will now be forced to share the links or descriptions for the knobs and other stuff, right?
All my knobs are in tact but a few of the auto AC buttons have worn.
I've seen the stickers but I may just send out the assembly to be redone correctly.
At around $100 it is way more than the stickers but it will look factory fresh.
bobsburban
Full Access Member
- Joined
- Aug 19, 2020
- Posts
- 130
- Reaction score
- 272
Finally got the fluids in the diffs and transfer case changed out. Leaking pinion on rear diff may not have been leaking - some dummy overfilled it previously. Filled to level and we'll see if it continues to leak. Rear Timbren bumps/auxiliary springs inserted where old bump stops had rotted off. Underneath now buttoned up other than brakes/front hubs before the Oregon Trail trip next year.
New tow mirrors installed that pivot the correct way for car washes. Got it washed and waxed, not that it needed it or anything. Pulled the door ding strips off - that's an improvement in the looks department - but found the passenger door had been involved in the right front corner wreck that I knew about when I bought it. Pulled off paint down to bondo, so think I'll sand everything down and put a Trail Boss or Z71 or AT4 or some other decal over it.
New tires are next.
New tow mirrors installed that pivot the correct way for car washes. Got it washed and waxed, not that it needed it or anything. Pulled the door ding strips off - that's an improvement in the looks department - but found the passenger door had been involved in the right front corner wreck that I knew about when I bought it. Pulled off paint down to bondo, so think I'll sand everything down and put a Trail Boss or Z71 or AT4 or some other decal over it.
New tires are next.
hillstrubl
Member
- Joined
- May 11, 2024
- Posts
- 66
- Reaction score
- 56
Battery died (had a group 48 in there) and wouldn't reliably hold a charge. I searched around and found that 94R "should" be the OEM size so I replaced the dead 48 with a 94R from Napa. While I was able to get it in there by moving the coolant overflow tank, it is TIGHT. It also doesn't sit perfectly flush as it sits on the "lip" of the front of the tray. I added a piece of rubber so that its not plastic on metal, but I'm not thrilled with the fit, I'd go group 48 if I did this again. Its also pretty tight against the coolant tank now (I put a rubber strip between them so there is some padding as well).
Last edited:
