What did you do to your OBS GMT400 Tahoe/Yukon Today?

[95escahoe]

Picked up these tires for $250 275/55/20 only 5500 miles on them now need to find some LTZ rims

Sent from my HTC One X using Tapatalk

 

[chaingun427]

Nice, I got my 18s for 400 bucks, havent seen anyone selling 20 inch ltz rims around here

Sent from my SAMSUNG-SGH-I537 using Tapatalk

 

[95escahoe]

Nice, I got my 18s for 400 bucks, havent seen anyone selling 20 inch ltz rims around here

Sent from my SAMSUNG-SGH-I537 using Tapatalk

Not bad, theres someone on CL selling a mint set here for only $650 usually go for 1k or so, only been on for a few days waiting for an email, if not might Ebay a set or flip these cause they go for $600 + new

Sent from my HTC One X using Tapatalk

 

[noJeepshere]

Picked up the Dana 60 I bought for my sas.

cent frum a smaert fone

 

[The Dude Abides]

I removed the running boards and gave sylvester his first oil change. Only to have to throw in some leftover oil i had lying around and take it to a professional shop to have it removed. The firestone which had been doing this trucks service put the filter on so dam tight i tore it open trying to take it off. Luckly some ductape and only two blocks latter and they were able to remove it. I have been changing my own oil for years and have never had the need to put one on so tight i couldnt remove it with my bare hands. What a frigging ordeal.

 

[BirchyBoy]

I removed the running boards and gave sylvester his first oil change. Only to have to throw in some leftover oil i had lying around and take it to a professional shop to have it removed. The firestone which had been doing this trucks service put the filter on so dam tight i tore it open trying to take it off. Luckly some ductape and only two blocks latter and they were able to remove it. I have been changing my own oil for years and have never had the need to put one on so tight i couldnt remove it with my bare hands. What a frigging ordeal.

Ouch. I think you were lucky to make it there without any damage from oil loss. I wish you were closer; I'd be interested in buying those running boards you don't want!

---------- Post added at 05:29 PM ---------- Previous post was at 05:28 PM ----------

I rented a MC trailer from UHaul and dragged my motorcycle to the shop for a valve adjustment. I think I rented UHaul's first MC trailer it ever built. I haven't seen such a sorry excuse for a trailer ever.

 

[rmodel65]

i started up the hoe..but then i put a new voltage regulator in the rust bucket..got to find a new hood and a bed and go to town on getting it prepped for paint sometime this summer

 

[BirchyBoy]

Just finished replacing the downstream bank 2 O2 sensor. Fired it up and the service engine light is off Hopefully it will stay off! Now it's time to upgrade the transmission cooler.

 

[SunlitComet]

bled out the brakes again to rid it of an air pocket.

 

[domer94]

swapped out my alternator that was starting to whine bad. put in a reman from advance auto. super easy, nice and quiet. one problem solved. changed the oil / filter with mobil 1 high milage. hit the zerk fittings on the steering and ball joints with some fresh grease. sprayed up any corrosion spots with rust-oleum rust tough paint. noticed i may have a weepy rear main seal . the lower bell housing cover was a bit wet with oil. it will have to stay that way for a while, i dont notice any puddling on the garage floor yet and dont feel like pulling a trans at the moment.