What did you do to your OBS GMT400 Tahoe/Yukon Today?

[SunlitComet]

you have to remove rear brace to fit it and get a new proper belt or it will be over tensioned. to remove brace, accessory brack on that side needs to be move forward to get one bolt out of back of brace. 30 minutes work total.

---------- Post added at 03:34 PM ---------- Previous post was at 03:31 PM ----------

for vortec 350 with 140 amp alt.

 

[kaoticlife]

I had replaced the stock 105 amp about 3 months ago with an ad244 from eBay and I guess it just decided to give up. Had it tested this am and it failed..asked the Guy to run the test 3 times to make sure and it failed all 3 times. So bought one for 147 and some change hooked it up and all good now!

sent from tapatalk2 using rabbit ears and aluminum foil.

 

[VicYukon]

Today I just took my Yukon(stormtrooper) to get full carwash in and out. Then went out for a drive and eat with the family.

 

[slipping]

Fabbed up my TV bracket

 

[19 tahoe 97]

just got in from playing in the snow with my truck.

 

[VicYukon]

Today I started and finished up painting my upper concole took me about 20 mins what you guys think?

 

[xanatost]

Put in MSD distributor, Hoe hit 170,000

 

[SunlitComet]

still not done mine yet. just sitting in the truck awaiting a install issue response from msd.

 

[SunlitComet]

well msd say even with synthetic oil in the engine just put the included lube pack on the dizzy and drop it in.

 

[19 tahoe 97]

put a piece of cardboard in front of the radiator because of the cold. helps mpgs a bit and it stops knocking sooner.