Will it fit

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Jeremiahbroom4

TYF Newbie
Joined
Oct 29, 2024
Posts
2
Reaction score
2
I have a 2001 Yukon Denali with some differential issues and some transmission issues will a 2000 Yukon sle differential and or transmission fit in my 2001?
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
25,926
Reaction score
38,660
Location
Stockton, Ca.
physically they should fit
the issue is the drivetrain setup
for instance if your denali is awd or selectable awd? or 2wd, a 2001 could maybe be any of those
other than that the differential gear ratio has to match i.e. 3.42, 3.73 etc
2000 was a odd ball year gm made both obs and nbs, but the transmission (i think) was the same up to 2002.
 

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,117
Reaction score
2,291
Location
Dallas, Texas
The 2000 is also a 4 wheel drive vehicle? Is so, just swap the transfer case. If it's a 2wd, then the transmission won't work.

Rear end will swap no issues, just as long as you keep the matching gear ratio.

Both of these are GMT800s, I'm pretty sure. Correct?

I think for 2000 the only GMT400 was the Denali? On that one, nothing would swap to the GMT800.
 

Marky Dissod

Full Access Member
Joined
Mar 3, 2023
Posts
1,811
Reaction score
2,465
Location
(718)-
My 2001 is the awd none selectable Denali
Then you'd likely need an AWD 'none selecatble' from another Denali or Escalade?

As for the 4L60E, I imagine that you'd also need one from another Denali or Escalade.

All that said, it's very likely that a better long-term investment'd be to properly rebuild the ones you already have,
unless you are SURE that whatever you get from the other Denali / Escalade are in GREAT shape.
 

Doubeleive

Wes
Supporting Member
Joined
Nov 7, 2017
Posts
25,926
Reaction score
38,660
Location
Stockton, Ca.
Then you'd likely need an AWD 'none selecatble' from another Denali or Escalade?

As for the 4L60E, I imagine that you'd also need one from another Denali or Escalade.

All that said, it's very likely that a better long-term investment'd be to properly rebuild the ones you already have,
unless you are SURE that whatever you get from the other Denali / Escalade are in GREAT shape.
haah, when I had my 00 and needed a front diff a rebuild was $1200+ (way back), snatched a used one out of the junkyard (that looked like it had already been gone thru anyway) for $60 waaaaay ahead of the game, it lasted past 324k when I sold it, still saw it on the road a couple years later
 
Top