Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
www.fixd.com
Have you fixed this yet? If not, wonder if it's simply your gas cap needing to be replaced. If that's it, should clear on its own once a new cap is installed.
The parts store kids don't test or clear your codes (properly)hell 98% of them don't have a clue about anything gone are the days when you had to actually know something about cars to work there you can get a cheap scan tool for around 30 bucks it will help
I did not notice what year you have if it's OBD one discount negative place a jumper between poss -&neg.. let it sit for about 20 min it will drain all stored electric in PCB ecm (etc) when you reconnect turn key to run let sit for a min or two before starting
Removed neg from battery place jumper wire with alligator clips from the disconnect neg term to the still connected poss wire leave like this for ten min it will be not harm the truck it will not blow up it when done just like this will drain the storm energy from all!!! Controllers sensor's etc
