Search results

  1. G

    05 Hoe with Tonys 3/5 Cornering Package.

    Well last night I moved the sway bar over an inch to clear the panhard bracket and I'm digging life on the ride quality now. With no air in the helper bags it rides better than stock and takes corners like its on rails. Gonna have to take the front down a little with the torsion keys to level it...
  2. G

    Not a good night

    Did you move the rear sway bar over 1"? I had a misunderstanding about the swaybar and my ride was terrible also. Finally figured out the swaybar was sitting on the panhard bracket at a dead stop and was hitting hard when driving. Going to fix it this evening and should fix my problem.
  3. G

    05 Hoe with Tonys 3/5 Cornering Package.

    Just ordered the adjustable upper and lower control arms and looking at some new front sway bar end links. Anyone have a suggestion for the sway bar end links and size?
  4. G

    Front end parts...what brand?

    Correct me if I'm wrong but doesn't Moog make some of the oem parts? I just replaced the whole front end with all Moog parts. Saved almost $300 from rockauto over my gm supplier.
  5. G

    Lowering with 20 inch wheels

    3/5 on NNBS LTZ 20's
  6. G

    05 Hoe with Tonys 3/5 Cornering Package.

    Thank everyone and yea I've got a good alignment guy that'll level it all out for me and make sure I've got the rearend centered up. Wished I had went ahead and put the adjustable upper and lower rear control arms on too. I'll be doing that in the near future. There's not much if anything I...
  7. G

    05 Hoe with Tonys 3/5 Cornering Package.

    Well spent all day yesterday lowering my wife Hoe and thrilled with the way it turned out. Going to get an alignment in just a few minutes. New upper and lower contour arms with ball joints, 4 new shocks, front and rear sway bars, sway bar relocators, new coils, helper bags, new bumpstops, free...
  8. G

    What did you do to your NBS GMT800 Tahoe/Yukon Today?

    Installed Tony's 3/5 Cornering kit last night with upper and lower control arms and ball joints, front and rear sway bars, 4 new shocks, new rear coils and helper bags, free travel modification, new idler arm, new pitman arm, both inner and putter tie rods, both front wheel bearing and hub...
  9. G

    Steering column clunking noise....

    Just replaced the shaft last night for the same exact reasons and so far it seems to have fixed the problem. The new shaft was redesigned to fix the problem supposedly. Think the shaft was like $40 something through rock auto.
  10. G

    Hd conversion on my tahoe is complete

    Yeah I read about lowering the bumper but must have missed the part about the bumper cap being an HD bumper cap. Thanks again for the information!
  11. G

    Hd conversion on my tahoe is complete

    Thanks for the info! ---------- Post added at 12:28 PM ---------- Previous post was at 12:24 PM ---------- So that is the HD hood and grill obviously and a stock tahoe bumper with a HD bumper top? So many different ways to do this but yours is the one I like the most for my application...
  12. G

    Hd conversion on my tahoe is complete

    Looks Great! Maybe this is a stupid question but do you still use the stock tahoe headlights with the HD grill or do those have to be swapped also?
  13. G

    New From SETX,

    Yeah I hate half a##ing anything. I've been trying to find a paintable grill shell and not having much luck. Also just removed the roof rack and those screws are really bugging me some kinda bad. She doesn't want an esky rack or any rack period so unless there is something else I can do ill just...
  14. G

    SETX LED Installer?

    I bought 2 Mercury outboard motors. Boats are my thing this Tahoe is my Wife's ride. All this money I'm spending on her ride is just a means to an end so I don't have to buy her a new car since this one is paid for.
  15. G

    New From SETX,

    Thanks everyone! Digitalfiend I just ordered the 3/5 Cornering Package from Tony at NorCal and also ordered a new pitman arm, inner and outer tie rods, wheel hubs and bearings, steering shaft, idler arm and looking to upgrade the brakes also. Should have quite a few parts showing up this week...
  16. G

    New From SETX,

    TahoeWhat where are you in Tx?
  17. G

    SETX LED Installer?

    Preciate it! If it could be done in a day It wouldn't be that far to drive up there. I mean I just drove to Mississippi and south La today to buy 2 motors so I'm down for road trips.
  18. G

    SETX LED Installer?

    Will do Thanks! 2005 Tahoe LT
  19. G

    New From SETX,

    I'm in Orange,Tx on the Louisiana border.
  20. G

    SETX LED Installer?

    Was wondering if there is is anyone in the area that can do all the switch panels on my wife's Hoe? I've read all the how to's and its just something I'd rather pay someone to do. I've spoke with 2 people already but all they really know how to do is the cluster? I've got enough on my plate with...
  21. G

    New From SETX,

    Hi everyone been lurking long enough and finally joined the forum. I've got my wife's 2005 Hoe that is in the process of a full makeover and ill be needing some help with questions.

Forum statistics

Threads
131,401
Posts
1,850,402
Members
95,494
Latest member
T2003

Latest posts

Top