Looks great
Reminds me of my old days lol
Used to **** after these trucks in college.
Reminds me of my old days lol
Used to **** after these trucks in college.
07Burb's '98 ECSB 4x4
- Thread starter 07Burb
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,348
- Reaction score
- 17,134
I've had a few of them over the years and never tire of them 
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,348
- Reaction score
- 17,134
What: BedRug bed liner
From: truckmods.com
On: 1998 Chevy K1500 extended cab short bed
Ease of install: 1/10 (1=the easiest)
Quality of Material: 9/10
Fit and finish: 9/10
Time needed for install: 1 hour or less
I was asked to give a quick write up of this so here it is.
The install was super easy with no tools needed. The liner comes in two pieces. One piece for the sides and front wall and another piece for the floor and tailgate. These two pieces zip together. Before you put anything in the bed you'll need to clean it real good. The liner stays in place via Velcro strips provided in the kit. That Velcro then adheres to the bed so it needs a nice clean surface.
The fit and finish is pretty good. There are some spots along the wheel wells that's not as snug as I'd like but I'm thinking that as the sun hits it it'll form around the wheel wells better. The quality of the material also seems to be pretty good and definitely looks nice right now.
This is my first BedRug so I'll be interested to see how it does with holding up to snow, ice and rain as well as when I use the bed as a truck bed is to be used. I am generally very easy on my trucks but there are times when I use them to haul mulch or lumber or something.
Here are some pics to show how easy the process is. It took me roughly an hour but I was taking my time and also dealing with my 8 year old at the same time lol
From: truckmods.com
On: 1998 Chevy K1500 extended cab short bed
Ease of install: 1/10 (1=the easiest)
Quality of Material: 9/10
Fit and finish: 9/10
Time needed for install: 1 hour or less
I was asked to give a quick write up of this so here it is.
The install was super easy with no tools needed. The liner comes in two pieces. One piece for the sides and front wall and another piece for the floor and tailgate. These two pieces zip together. Before you put anything in the bed you'll need to clean it real good. The liner stays in place via Velcro strips provided in the kit. That Velcro then adheres to the bed so it needs a nice clean surface.
The fit and finish is pretty good. There are some spots along the wheel wells that's not as snug as I'd like but I'm thinking that as the sun hits it it'll form around the wheel wells better. The quality of the material also seems to be pretty good and definitely looks nice right now.
This is my first BedRug so I'll be interested to see how it does with holding up to snow, ice and rain as well as when I use the bed as a truck bed is to be used. I am generally very easy on my trucks but there are times when I use them to haul mulch or lumber or something.
Here are some pics to show how easy the process is. It took me roughly an hour but I was taking my time and also dealing with my 8 year old at the same time lol
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,348
- Reaction score
- 17,134
Thanks, Jonas
OP
OP
- Joined
- Jan 3, 2011
- Posts
- 50,348
- Reaction score
- 17,134
you know what they say about a sexy thumb 
We talked about a pool.
LOL
Looks GREAT
LOL
Looks GREAT
