2” Level

[Fsu9699]

I must have measured wrong before I added the 2” motofab on my 2019 SLT. Right now the front is high by 1/4”. What are my options to get this leveled better?

 

[olyelr]

Id go with a 1/2”- 3/4” spacer in the rear.

 

[PG01]

I must have measured wrong before I added the 2” motofab on my 2019 SLT. Right now the front is high by 1/4”. What are my options to get this leveled better?

Give a few days, it will settle in 1/4 isn’t much

 

[GreyStone]

I must have measured wrong before I added the 2” motofab on my 2019 SLT. Right now the front is high by 1/4”. What are my options to get this leveled better?

take out your 3rd row seats and lose the spare tire and the rear will sit higher.

 

[Captain Insaino]

+/- 1/2 inch = level (ish)

My rear spring insulators were so smashed, when I replaced them it added 1/2 lift to the rear If it really bothers you, that might help to replace one or both of each.