Anyone interested in modifying the seat to fully recline?

[cam3439]

more pics...

 

[cam3439]

Some of these pics will show the bolts on the 4 corners of the seat's bottom frame/rails. Some of these bolts will be hidden underneath removable panels. I used a 7/16 and 15mm socket to remove these. Should be easy enough. You'll need various tools and sockets (metric went up to 18mm and std. went up to 15/16). I also recommend that you test your final product before you install the seat. I did this and found out that I also had to cut some of the spring. Do a mock trial on the floor to test out the mod to make sure you cut enough off of the spring.

 

[MDMILL1]

Nice write up I am still not sure if I want to do this, but at least now we have a how to.....Thanks again

 

[blazerjohnny94]

Ok cam3439 my question for you as I am in the middle of this project is did u going down the side with the notches or the other completly round side please reply this job is a complete pita

 

[blazerjohnny94]

Grind sorry

 

[blazerjohnny94]

Almost worth simply paying the arm and leg for power seats to plug in instead

 

[Cesar Valle]

has anyone done a mod for the rear seats to recline?