Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,489
- Reaction score
- 10,217
If you have a DIC on your Tahoe, I believe that all of the options contained there involve changes in the BCM settings.
BCM and Tech2
- Thread starter BattleTank
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The tech2 is a diagnostic tool for the most part, you can't really "modify" things with it other than the afterblow as mentioned already. If you have the digital HVAC control you can make the outside temp display on the HVAC control panel and you can adjust tire size.
Those are the only "user" adjustable things that I am aware of. The rest is all test functions and relearn various modules/sensors, and lastly calibrations as a pass thru device if that is even still supported by techline anymore, some have reported it takes special access by gm support.
Those are the only "user" adjustable things that I am aware of. The rest is all test functions and relearn various modules/sensors, and lastly calibrations as a pass thru device if that is even still supported by techline anymore, some have reported it takes special access by gm support.
petethepug
Michael
Afterblow, NBS, NNBS, DIC, etc. Manufacturer specific anachronyms that all the long term owners are used to. We forget these vehicles are lasting 2-3x as longer than GM expected and some of these $86k vehicles are being sold for $14.5k (that’d be my Esky lol), and still reliable with another 200k left in them.
That’s a solid referral on the BTdieselwork OBD programer. 295 for the unit and 395 for the version with the engine & trans tune, which I regret not getting.
The best way to get up to speed on the Tech2 is you tube videos. All of GM’s secret unlock features are found in the BTdieselwork module.
That’s a solid referral on the BTdieselwork OBD programer. 295 for the unit and 395 for the version with the engine & trans tune, which I regret not getting.
The best way to get up to speed on the Tech2 is you tube videos. All of GM’s secret unlock features are found in the BTdieselwork module.
petethepug
Michael
Tech2 Guide, here ya go …
BTdieselworks guide …
BTdieselworks guide …
Joseph Garcia
Supporting Member
- Joined
- Aug 2, 2018
- Posts
- 7,489
- Reaction score
- 10,217
We might as well add the Tech 2 Pathing Document to this Thread.
petethepug
Michael
That is a Gem! 154 pages of goodness
U
UBattleTank
Senior Member
- Joined
- May 16, 2024
- Posts
- 118
- Reaction score
- 163
This is the info I was looking for ^^^
Not some half ass'd, 2 word response with no context.
Not some half ass'd, 2 word response with no context.
The pathing can be very vehicle dependent, so not all selections may be valid for yours. YMMV
petethepug
Michael
Jeez, alright, 154 pages of goodness for a few specific owners then.
