Check Engine Light

[SnowBuck]

P0650 - Malfunction Indicator Light (MIL) Control Circuit.
Came on for 2 days. Now it went off ?!?!?!?
What's going on. Anything to worry about?

 

[Doubeleive]

P0650 - Malfunction Indicator Light (MIL) Control Circuit.
Came on for 2 days. Now it went off ?!?!?!?
What's going on. Anything to worry about?

interesting, a malfunction of the malfunction lol
does the cel light up when you turn the key to run but have not started it yet?

 

[SnowBuck]

Yes...cel light ON when you turn the key.
But Now it goes OUT when started, as normal.
What's going on?
Been out for 3 days now ?!?!?!?
UPDATE: the cel is now BACK ON !!!!!

 

[drdave81]

You have an issue with the circuit that illuminates the check engine light. Bad connection on the cluster, wiring, etc.

 

[Doubeleive]

Yes...cel light ON when you turn the key.
But Now it goes OUT when started, as normal.
What's going on?
Been out for 3 days now ?!?!?!?
UPDATE: the cel is now BACK ON !!!!!

try a different scanner to see if you get the same code

 

[SnowBuck]

Found an additional code (P0160). Replaced Oxygen sensor. CEL now out.
HOWEVER - discovered this: key to ON CEL is on. Start car CEL goes off. BUTT...if you very quickly stop and then key to ON = no CEL. Turn off, wait 5 seconds and to ON = CEL ON. Almost like something is resetting?!?!?
Would someone try this: Start your car so CEL goes out. Very quickly turn off and then to ON. Did your CEL immediately come on?