Headers

[Ducati18]

Are you able to do a big cam with the maggie? Was that the 405 hp zo6 cam?

 

[JennaBear]

You can't go extremely big with the Maggie, but any cam company should be able to help you pick out the right cam. Yes the 405HP Z06 is what Justin has in his truck. Not sure which cam we will run in the TBSS with the TVS1900.

 

[Ducati18]

After installing. I would have to go and get it tuned wright or it wil run like shxx right? Will it do good on daily driving? I just need new valve springs and thats it correct?

 

[JennaBear]

You will need to get tuned for the cam you choose. Whether or not it will run like crap without a tune, depends on the cam you get. If you aren't sure which cam to get, I suggest calling cam companies and seeing what they suggest for your application.

I replaced springs and pushrods with my cam swap.

 

[Ducati18]

Thanks for the help.

 

[Max]

I love my longtubes, must have picked up a solid 20hp and 25tq. Smoothed out the powerband and it pulls at damn near any rpm, really runs up top now. I'd look at the dynatechs, stainless works, and AEM if you can find em. I was lucky to come across my AEMs for a really good deal, probably the best thing I've done to the truck besides the tune. Don't forget to buy some plug wires as the stockers might not handle the heat and closer proximity on aftermarket manifolds.