How To: Hidden Antenna Mod

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Soundmound

Member
Joined
Sep 29, 2013
Posts
89
Reaction score
1
Location
Seattle WA
Find of the day!

Totally knocked this out today after I got debadged and buffed. The sum cost $2.96 and two minutes time. You have no idea the joy it gives me to be rid of that monstrosity. There was minimal signal loss FM and I don't do AM ever, so..... The juice is worth the squeeze. Do it up the A pillar 10 gauge stranded wire, might go solid core in the future since its a cheap theory to test. One ring terminal and M6-1.00 nut and four feet of wire, he'll you could go 6-8 feet and see if it helps reception all the way down the body. Oh, just buy black wire don't be a cheapo and use whatever's laying around. I will do the esky cap though.
 

nickbaldwin86

Member
Joined
Nov 6, 2013
Posts
67
Reaction score
1
Location
Oregon
to lazy to read 11 pages..

did this kill signal?

Is there a replacement cover that doesnt have the hole in it?

Thanks
 

Tahoewhat

Ballin' on a Budget
Supporting Member
Joined
Sep 20, 2009
Posts
3,720
Reaction score
24
Location
TX
To further the ? above, anyone have HD radio? Hows reception with it.
(did this along time ago, but never tried the wire up the pillar and roof)
 

donut slayer

Full Access Member
Joined
Aug 6, 2010
Posts
87
Reaction score
3
I did the wire under the molding trick, but the reception was terrible. I went to a short rubber flexable antenna.
 

Tahoewhat

Ballin' on a Budget
Supporting Member
Joined
Sep 20, 2009
Posts
3,720
Reaction score
24
Location
TX
Yeah did this as well. Reception is alright. Alot of static when driving. Going to try another way
 

jomulk56

Resident Lurker
Joined
May 1, 2009
Posts
1,237
Reaction score
11
Location
IN
just did it today...
IMG_20110222_084756.jpg

IMG_20110222_084748.jpg

IMG_20110222_084813.jpg

IMG_20110222_084901.jpg

IMG_20110222_084839.jpg

IMG_20110222_084844.jpg

I wraped some copper wire around the base and ran it up through the weather seal to get better reception. I get better reception than with the original antenna! Esky piece is on order...for now i put duct tape over the hole

Does the Esky piece fit over the base that way?
 

Tahoewhat

Ballin' on a Budget
Supporting Member
Joined
Sep 20, 2009
Posts
3,720
Reaction score
24
Location
TX
Yeah it fits fine. The base is lower than the esky cover.

I even put a nut on the base and still fits.
 

jomulk56

Resident Lurker
Joined
May 1, 2009
Posts
1,237
Reaction score
11
Location
IN
Awesome if it works for me I'll be buying the cover
 

Tahoewhat

Ballin' on a Budget
Supporting Member
Joined
Sep 20, 2009
Posts
3,720
Reaction score
24
Location
TX
it will work, no doubt. Unless you put something on the base that makes it alot higher. But even the screw thats there is lower. So your good.

Just switched up to putting antenna down fender and works much better for me, than pillar, etc.
 

doubletap1911

Member
Joined
Feb 8, 2011
Posts
51
Reaction score
6
Has anyone tried laying the antenna on the fender AND also running a wire up the weatherstripping?
 

Forum statistics

Threads
132,766
Posts
1,873,901
Members
97,604
Latest member
08DenaliMan
Top