Lower Control Arms

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Foggy

Full Access Member
Joined
Jul 25, 2019
Posts
1,137
Reaction score
1,474
Location
KS
SO I'm thinkin it's getting time for a front susp refresh. I've got 140K on the clock. I have
zero issues now, so it's just a preventative maintenance thing... Going to do struts, springs,
UCA's, Tie Rods, Etc
But what do you think about the LCA's...???? Should I just get new assemblies??? Or reuse
my OE and put in new ball joints and bushings?
And how hard is it going to be doing the bushings Or even necessary ???
Thanks
 

swathdiver

Full Access Member
Joined
May 18, 2017
Posts
20,014
Reaction score
27,164
Location
Treasure Coast, Florida
If you replace the ball joints only you still have old bushings unless you replace them too. All that work and tools and aggravation is more than a new OE control arm.

I did save my old ones, thinking I'd replace the wear items and have them ready in ten years but now they're getting closer and closer to the garbage. Same with my old calipers, springs, front diff mounts, etc.!
 

strutaeng

Full Access Member
Joined
Aug 10, 2023
Posts
1,351
Reaction score
2,922
Location
Dallas, Texas
Ditto on the bushings or just a new LCA with everything.

Although I would say 140k is kinda low for a complete rebuild, no? My 99 Silverado got a front end rebuild at 260k. Everything was original except for shocks. I would jack up the front and do the "shake" test first before starting to replace things.

And also ditto on a lot of aftermarket parts not being as good as what comes originally with your truck, sometimes even the better brands that are supposed to be OEM.
 

B-train

Full Access Member
Joined
Sep 12, 2022
Posts
2,356
Reaction score
4,105
I say OEM on the components. Aftermarket has become such chit over the past few years. If the LCA ball joint doesn't have any play, let it be. They last a long time, but depending on the roads and environment, 140k is about the time that play starts to show up. I ran mine with minimal play overlanding for thousands of miles - no change upon return with an additional 15k of road miles. They are durable.

However, I opted to replace the aluminum ones on my 2008 yukon when it had about 175k on them - a small amount of play in the ball joint but nothing serious. I spent the $800 to get OE ones from rock auto. I kept the OG ones in case I wanted to do as @swathdiver did, but who knows if they will be used again. My 2017 has almost 170k on the original ones with just a slight amount of play noticed on the last alignment - gonna run these to over 200k I'm sure.
 

Forum statistics

Threads
133,191
Posts
1,881,329
Members
98,215
Latest member
swdn25
Top