Meccanoble
Full Access Member
In the past I complained about transmission stutter which recently improved with another transmission fluid/filter change. But lately i'm getting the P0300 code for misfire and really feeling it going up hills. Truck sometimes loses a lot of power. I have done the following:
1. Replaced air filter
2. Cleaned MAF
3. Spark plugs changed about 50k miles ago or less
4. Tested spark with spark tester on all 8 coils
If all these tests are good, my next concern is fuel. Some research states a bad fuel filter could cause loss of power especially going up hills but it seems its much harder to change on this truck than previous generation so holding off. I think its in the gas tank?
At one time I got a code for P0305 which was for Cylinder 5 misfire but this never came back. I swapped coils in cylinder 5 and 6 to see if code would repeat or switch to different cylinder but same or different code never came up. Plus spark tester seems to confirm they are all functional.
I was in the process of creating a home depot intake just to feel better about myself with breather filter for PVC but i'm sure this wont help. Any suggestions on where to look next? How can I test fuel pressure? I have pressure gauges for the A/C stuff but doubt i can use for any troubleshooting here.
I'm going to purchase some fuel cleaner and refill with premium (95% of the time I get regular from the same 2 or 3 gas stations). I refilled somewhat recently so possibly bad fuel...
1. Replaced air filter
2. Cleaned MAF
3. Spark plugs changed about 50k miles ago or less
4. Tested spark with spark tester on all 8 coils
If all these tests are good, my next concern is fuel. Some research states a bad fuel filter could cause loss of power especially going up hills but it seems its much harder to change on this truck than previous generation so holding off. I think its in the gas tank?
At one time I got a code for P0305 which was for Cylinder 5 misfire but this never came back. I swapped coils in cylinder 5 and 6 to see if code would repeat or switch to different cylinder but same or different code never came up. Plus spark tester seems to confirm they are all functional.
I was in the process of creating a home depot intake just to feel better about myself with breather filter for PVC but i'm sure this wont help. Any suggestions on where to look next? How can I test fuel pressure? I have pressure gauges for the A/C stuff but doubt i can use for any troubleshooting here.
I'm going to purchase some fuel cleaner and refill with premium (95% of the time I get regular from the same 2 or 3 gas stations). I refilled somewhat recently so possibly bad fuel...