Replacing fuel injector spider assembly and need help

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

skyhighsami

Full Access Member
Joined
Mar 2, 2010
Posts
403
Reaction score
39
. I have a 1996 Chevy Tahoe that needs a new fuel injection spider assembly. I ordered they new improved part. Does anyone have any advice on how to best do it? I'm also going to replace the spark plugs and change the oil. What plugs work best in the Vortec engine, and what weight oil in a 150k mile motor?

I'm going to pull the cats off and pull the stock muffler off. Will I get a SES light taking the cats off a 96 model?
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
187
Location
unknown at this time.
if none modify ignition system delco 41-993 or autolite xp605 gapped at .060. 5w-30. i use 5w30 mobil synthetic at 250k miles right now. yes you will have lights and have performance issues as well taking off cats and muffler assembly. leave the cats there and replace them if needed.

as for the injectors just get in and do it.
 

Monstar_est87

Full Access Member
Joined
Nov 9, 2009
Posts
905
Reaction score
11
Location
City of Angeles
Is there any way to tell if u have the CSFI or MPFI without removing the upper intake mani..? I'd hate to buy the new MPFI then find out my truck already has it when I go 2 install it...
 

xanatost

Full Access Member
Joined
Mar 9, 2011
Posts
755
Reaction score
7
Location
Lafayette, La.
one way you might be able to see is take off the throttle body and see if you can see the injector lines. If they look small then you got the CSFI still in there. The MPFI has bigger lines. Other than that i don't know.

For cleaning your upper intake use a good carb cleaner and get all the big caked on stuff off. Then run it thought your dish washer. I did with mine and got it spotless
 

SunlitComet

OBS Jedi-Do Good
Joined
Sep 30, 2010
Posts
16,206
Reaction score
187
Location
unknown at this time.
Remove the injection body connector and take pic of the terminAls on the injection body. Let me know if you see circular holes between the injector terminals or t shaped holes. Maybe less of a hassle the taking of tb since you have Kn fipk on.
 

foxrider251

Member
Joined
Feb 3, 2013
Posts
32
Reaction score
0
Location
Edson, Alberta
skyhigh, when i did my spider i just took the plenum off. i never took the whole manifold out either way works i suppose but you can do it with just taking the plenum off fyi, oh and youre gonna have a goddamn blast working around the big wiring harnesses that run right over top of the plenum. thank gm for that awesome design. also ac delco plugs only if youre doing them and you should do the wires too while youre at it.
 
Last edited:

Monstar_est87

Full Access Member
Joined
Nov 9, 2009
Posts
905
Reaction score
11
Location
City of Angeles
Good info guys... Ill take a look in there this weekend and see wat i can find... I wonder if a junkyard mpfi Spider find will suffice..?
 

foxrider251

Member
Joined
Feb 3, 2013
Posts
32
Reaction score
0
Location
Edson, Alberta
and coming from a guy who has had to tear everything apart twice trust me that extra couple hundred you spend will pay itself off
 

Forum statistics

Threads
132,054
Posts
1,861,637
Members
96,509
Latest member
gottaluv01tahoe

Latest posts

Top