Rocket Man's 02 Denali Build Thread AKA "THE BEAST"

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

TM98

Full Access Member
Joined
Sep 20, 2016
Posts
154
Reaction score
42
How can you tell if you have the newer version? I have an 04 but built in 09/03.
 
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
How can you tell if you have the newer version? I have an 04 but built in 09/03.
The old version has a pcv valve that sits in a big rubber grommet in the rear of the driver side valve cover that you can remove with your fingers that the hose connects to. The newer style just has a nipple on the valve cover to connect the hose to. Here's the old style. The pcv valve is attached to the hose on the right, removed from the valve cover.
smallpcv1_zpsfffc4ac8.jpg
 
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
Ordered some nice billet coil brackets today. Also, nothing to do with The Beast but I've been fighting with Allstate about what they're going to pay me for my bagger. I had over $42k invested plus my time since I built it myself. First they offered 21k and wanted 3k for me to buy it back. I bitched and they came back with the news that since it was going through my uninsured motorist policy they could pay for all the custom parts. They offered 27k but increased buyback to 8k. Today I told them I was going to have it appraised and they said ok, but they would also do the same and they would both talk and come to a middle ground. Then they asked who I was using and come to find out it's the same company they use so they said they'd probably just use his figure. I talked to the guy and it sounds like I might do real good, he is going to make sure I get replacement cost at minimum and possibly more, maybe close to $50k. I gave him receipts totaling $22k plus the cost of a '14 Street Glide adds up to about $42k plus he said labor for the build needs to be figured in. Yay. Fingers crossed.
 

Tonyrodz

Resident Resident
Joined
Feb 16, 2012
Posts
31,631
Reaction score
47,200
Location
Central Jersey
Ordered some nice billet coil brackets today. Also, nothing to do with The Beast but I've been fighting with Allstate about what they're going to pay me for my bagger. I had over $42k invested plus my time since I built it myself. First they offered 21k and wanted 3k for me to buy it back. I bitched and they came back with the news that since it was going through my uninsured motorist policy they could pay for all the custom parts. They offered 27k but increased buyback to 8k. Today I told them I was going to have it appraised and they said ok, but they would also do the same and they would both talk and come to a middle ground. Then they asked who I was using and come to find out it's the same company they use so they said they'd probably just use his figure. I talked to the guy and it sounds like I might do real good, he is going to make sure I get replacement cost at minimum and possibly more, maybe close to $50k. I gave him receipts totaling $22k plus the cost of a '14 Street Glide adds up to about $42k plus he said labor for the build needs to be figured in. Yay. Fingers crossed.
Good luck Red, I hope you get every penny out of them! They have no problem taking premiums for years, but the first time you make a claim, they make it hard as hell for you!
 

bottomline2000

Full Access Member
Joined
Oct 21, 2009
Posts
1,722
Reaction score
988
Location
Dallas, TX
Ordered some nice billet coil brackets today. Also, nothing to do with The Beast but I've been fighting with Allstate about what they're going to pay me for my bagger. I had over $42k invested plus my time since I built it myself. First they offered 21k and wanted 3k for me to buy it back. I bitched and they came back with the news that since it was going through my uninsured motorist policy they could pay for all the custom parts. They offered 27k but increased buyback to 8k. Today I told them I was going to have it appraised and they said ok, but they would also do the same and they would both talk and come to a middle ground. Then they asked who I was using and come to find out it's the same company they use so they said they'd probably just use his figure. I talked to the guy and it sounds like I might do real good, he is going to make sure I get replacement cost at minimum and possibly more, maybe close to $50k. I gave him receipts totaling $22k plus the cost of a '14 Street Glide adds up to about $42k plus he said labor for the build needs to be figured in. Yay. Fingers crossed.
Make sure u include the cost for the nitrous kit[emoji573]

Sent from my SAMSUNG-SM-T377A using Tapatalk
 
OP
OP
Rocket Man

Rocket Man

Mark
Supporting Member
Joined
Dec 25, 2014
Posts
26,004
Reaction score
50,862
Location
Oregon
The appraisal came in at $43,600 for my bike. Plus they have to pay for the appraisal itself as well as my helmet for a total of $44,200. And this is the specialty appraiser that they normally use so I think they'll have no choice to pay. Quite a difference from the $21,000 they initially offered. :favorites37:
 

Forum statistics

Threads
132,394
Posts
1,867,355
Members
97,043
Latest member
zachdacoo
Top